Live Inventory › Syren L4S Sporting
Farbarm L4S Black Initial Sporting 12ga 30" LH New

Farbarm L4S Black Initial Sporting 12ga 30" LH New

New — Factory New, Unfired
Call for price
Woolley item number 23666

All photos are of the actual gun. Every firearm ships to your FFL and includes a 3-day no-fire inspection. Store policies.

About this gun

A factory-new Fabarm L4S Black Initial Sporting in 12 gauge with the 30" barrel, built left-hand — Fabarm's gas-operated competition semi-auto, running a stainless steel piston and a gas system tuned for 2 3/4" target loads behind a TRIBORE HP tapered-bore barrel. Built left-hand throughout: the ejection port, the charging handle and the bolt release sit on the left flank away from a left-shoulder mount, the crossbolt safety is reversed, and the stock is cast the same way. Black anodized receiver with red anodized controls and magazine cap, strongly figured European walnut with a fixed comb, unfired, and supplied in the factory hard case with five extended EXIS HP Competition choke tubes.

(factory specs)

Details

ModelL4S Black Initial Sporting
Gauge/Caliber12 gauge
Barrel Configuration30" TRIBORE HP tapered-bore barrel; ventilated tapered top rib, 6mm rib height
Barrel30" TRIBORE HP tapered-bore steel barrel in matte black, chrome-plated bore, the progressive bore profile matched to the EXIS HP choke system
Proof Marks2 3/4" chamber; CIP proof stamp beside the ejection port with the IT25 date code; barrel marked FABARM S.p.A. - TRIBORE HP and MADE IN ITALY - OVERPRESSURE
AccessoriesFactory hard case; five extended EXIS HP Competition choke tubes — Skeet, Improved Cylinder, Light Modified, Modified, Full; choke tube wrench; three stock shims for cast and drop; magazine reduction rod and acorn nut

Measurements

LOPApprox. 14 3/4"
Drop at CombApprox. 1 3/8"
Drop at HeelApprox. 2 1/8"
PitchApprox. 5°
Cast at HeelApprox. 3/16" (left-hand cast)
Cast at ToeApprox. 3/16" (left-hand cast)
ReachApprox. 4 1/8"
WeightApprox. 7.19 lbs

Chokes

Five extended EXIS HP Competition hyperbolic choke tubes — Skeet, Improved Cylinder, Light Modified, Modified, Full; bright stainless bodies, knurled with a castellated wrench rim and a red HYPERBOLIC EXIS HP band, supplied with one tube fitted at the muzzle

Stock

Left-hand; European walnut with heavy dark marbled streaking over a honey-brown ground, finished with Fabarm's Triwood grain-enhancement treatment under a semi-gloss acrylic; 18 LPI cut checkering combined with stippling, wrapping the rounded pistol grip; straight fixed comb with no cheek piece; stock cast 3/16" at heel and toe for a left-shoulder mount, with three shims supplied to regulate cast and drop; Microcell 22mm black rubber recoil pad, smooth above and stippled below, molded with the maker's device over the FABARM name

Forend

Slim rounded sporting forend in matching European walnut, rounded in cross-section with cut checkering to each flank and the underside, the tip tapering smoothly to a plain termination with no beak or flare; retained by a threaded aluminum cap so the wood carries none of the mechanical assembly, which removes fore-end wobble; red anodized knurled magazine cap standing ahead of the forend tip

Action

Gas-operated semi-automatic with a stainless steel gas piston, the gas system tuned for 2 3/4" target loads; rotating bolt with a pivoting locking block engaging the barrel extension, chrome plated; no action spring in the buttstock, which attaches by a single stock bolt; four-round magazine tube, reducible to two rounds with the supplied rod and acorn nut; left-side ejection port with a red anodized knurled charging handle and a red anodized bolt-release button; crossbolt push-button safety at the rear of the trigger guard, reversed for a left-handed shooter; single black trigger blade

Receiver

High-strength aluminum alloy, black anodized — semi-gloss across the upper contour with a fine geometric stippled texture panel along the lower flank; lettering only and no engraved decoration, with FABARM in serif capitals, SPORTING in red and the L4S logo in silver and red on the left flank, and the L4S logo alone on the right, so the two flanks are not matched; machined radial fan pattern on the tang behind the trigger guard bow, present on both flanks; manufactured in Italy

Rib

Ventilated tapered top rib, 6mm rib height, carried clear of the barrel on posts with long rectangular ports; narrow flat top, transversely machine-serrated for glare control; Bradley-style front bead standing proud of the rib

More Syren L4S Sporting in stock