
Farbarm L4S Black Initial Sporting 12ga 30" LH New
All photos are of the actual gun. Every firearm ships to your FFL and includes a 3-day no-fire inspection. Store policies.
About this gun
A factory-new Fabarm L4S Black Initial Sporting in 12 gauge with the 30" barrel, built left-hand — Fabarm's gas-operated competition semi-auto, running a stainless steel piston and a gas system tuned for 2 3/4" target loads behind a TRIBORE HP tapered-bore barrel. Built left-hand throughout: the ejection port, the charging handle and the bolt release all sit on the left flank, away from a left-shoulder mount, and the stock is cast the same way. Black anodized receiver with red anodized controls and magazine cap, figured European walnut with a fixed comb, unfired, and supplied in the factory hard case with five extended EXIS HP Competition choke tubes.
(factory specs)
Details
| Model | L4S Black Initial Sporting |
|---|---|
| Gauge/Caliber | 12 gauge |
| Barrel Configuration | 30" TRIBORE HP tapered-bore barrel; ventilated tapered top rib, 6mm rib height |
| Rib | Ventilated tapered top rib, 6mm rib height, carried clear of the barrel on posts with long rectangular ports; narrow flat top with a fine matted sighting surface; Bradley-style front bead standing proud of the rib |
| Barrel | 30" TRIBORE HP tapered-bore steel barrel in matte black, the progressive bore profile matched to the EXIS HP choke system |
| Proof Marks | 2 3/4" chamber; barrel marked FABARM S.p.A. - TRIBORE and MADE IN ITALY |
| Accessories | Factory hard case; five extended EXIS HP Competition choke tubes — Skeet, Improved Cylinder, Light Modified, Modified, Full |
Measurements
| LOP | Approx. 14 3/4" |
|---|---|
| Drop at Comb | Approx. 1 3/8" |
| Drop at Heel | Approx. 2 1/8" |
| Pitch | Approx. 5° |
| Cast at Heel | Approx. 3/16" (left-hand cast) |
| Cast at Toe | Approx. 3/16" (left-hand cast) |
| Reach | Approx. 4 1/8" |
| Weight | Approx. 7.19 lbs |
Chokes
Five extended EXIS HP Competition hyperbolic choke tubes — Skeet, Improved Cylinder, Light Modified, Modified, Full; bright stainless bodies, knurled with a castellated wrench rim and a red HYPERBOLIC EXIS HP band, supplied with one tube fitted at the muzzle
Stock
Left-hand; European walnut with strong dark streaked figure over a pale ground, finished with Fabarm's Triwood grain-enhancement treatment under a semi-gloss acrylic; fine-line cut checkering laid in a flat panel on the pistol grip, finishing in a point at its upper rear; fixed comb; stock cast 3/16" at heel and toe for a left-shoulder mount; Microcell 22mm black rubber recoil pad, smooth above and stippled below, molded with the maker's device over the FABARM name
Forend
Slim rounded sporting forend in matching European walnut, rounded in cross-section with a flat cut-checkered panel to each side and a plain straight-cut tip with no beak or flare; retained by a threaded aluminum cap so the wood carries none of the mechanical assembly, which removes fore-end wobble; red anodized knurled magazine cap standing ahead of the forend tip
Action
Gas-operated semi-automatic with a stainless steel gas piston, the gas system tuned for 2 3/4" target loads; rotating bolt with a pivoting locking block engaging the barrel extension, chrome plated; no action spring in the buttstock, which attaches by a single stock bolt; four-round magazine tube; left-side ejection port with a red anodized knurled charging handle and a red anodized bolt-release button, the right flank unbroken; manual safety; single trigger with a black blade
Receiver
High-strength aluminum alloy, black anodized — gloss black across the upper with a matte black lower section carrying a fine stippled texture panel; lettering only and no engraved decoration, with FABARM in serif capitals, SPORTING in red and the L4S logo in silver and red on the left flank, and the L4S logo alone on the right, so the two flanks are not matched; machined fan pattern on the receiver belly behind the trigger guard bow, present on both flanks; manufactured in Italy