
Fabarm L4S Sporting Compact 12ga 28" RH New
All photos are of the actual gun. Every firearm ships to your FFL and includes a 3-day no-fire inspection. Store policies.
About this gun
A factory-new Fabarm L4S Sporting Compact in 12 gauge with the 28" barrel, built right-hand — Fabarm's gas-operated competition semi-auto in its compact fit, running a stainless steel piston tuned for 2 3/4" target loads behind a TRIBORE HP tapered-bore barrel. The compact stock is cut to a shorter length of pull on a thinner wrist with a reduced grip radius, and the fore-end iron carries the assembly so the forend wood takes no structural load. Matte black anodized receiver with red anodized controls and magazine cap, European walnut under Fabarm's Triwood finish, unfired, and supplied in the factory hard case with five extended EXIS HP Competition choke tubes.
(factory specs)
Details
| Model | L4S Sporting Compact |
|---|---|
| Gauge/Caliber | 12 gauge |
| Barrel Configuration | 28" TRIBORE HP tapered-bore barrel with ventilated tapered top rib |
| Chokes | Five extended EXIS HP Competition hyperbolic choke tubes, 97mm screw-in; supplied with one tube fitted at the muzzle, its knurled natural-metal body carrying a notched wrench rim and the red HYPERBOLIC EXIS HP band |
| Rib | Ventilated tapered top rib, approx. 6mm at the receiver, longitudinally grooved on its top surface; white Bradley-style front bead standing proud of the rib |
| Barrel | TRIBORE HP tapered bore with chrome-lined bore and chamber and an extended forcing cone |
| Proof Marks | 2 3/4" chamber; proof tested to 1630 BAR, Fabarm's own over-proof standard; steel shot proof |
| Accessories | Fitted hard case; five extended EXIS HP Competition choke tubes |
Measurements
| LOP | Approx. 13 5/8" |
|---|---|
| Drop at Comb | Approx. 1 3/8" |
| Drop at Monte Carlo | Approx. 1 3/4" |
| Drop at Heel | Approx. 2 1/2" |
| Pitch | Approx. 7° |
| Cast at Heel | Approx. 1/8" cast off |
| Cast at Toe | Approx. 1/4" cast off |
| Reach | Approx. 4" |
| Overall Length | Approx. 48 1/2" with an extended choke installed |
| Weight | Approx. 6.75 lbs |
| Warranty | 5 years |
Stock
Right-hand; European walnut, strongly marbled with dark streaking through both flanks of the butt, finished with Fabarm's Triwood grain-enhancement treatment under a gloss finish; cut checkering in panels to both sides of the pistol grip; fixed Monte Carlo comb; compact-specific profile with a shortened length of pull, thinner wrist and reduced grip radius; stock cast off at heel and toe for a right-shoulder mount; Microcell 22mm black rubber recoil pad, smooth above with a textured center panel, molded with the maker's standing figure device over the FABARM name
Forend
Slim rounded sporting forend in matching European walnut, cut-checkered to each side, the wood tapering smoothly to a plain termination with no beak or flare; the fore-end iron design removes the wood from the structural assembly, and the magazine tube is shortened to four rounds for balance; red anodized fluted magazine cap standing ahead of the forend tip
Action
Gas-operated semi-automatic with a stainless steel piston tuned for 2 3/4" target loads, running on hard-chromed action rails; no action spring in the stock, which attaches on a simple stock bolt; single trigger; cross-bolt safety at the rear of the trigger guard; red anodized knurled bolt handle at the ejection port on the right flank and a red anodized bolt release on the left
Receiver
Matte black anodized high-strength aluminum, free of engraving, with a stippled black panel inset along the lower receiver on each flank and a fan of cut rays behind the trigger bow on both sides; roll-marked L4S SPORTING with the FABARM name behind it on the right flank, and the L4S logo on the left over the line Made in Italy . 12 GA . Overpressure tested 1630 BAR . Steel shot proof; made in Italy