
Fabarm L4S All Sport RS 12ga 30" Adj RH New
All photos are of the actual gun. Every firearm ships to your FFL and includes a 3-day no-fire inspection. Store policies.
About this gun
A factory-new Fabarm L4S All Sport RS in 12 gauge with the 30" barrel — Fabarm's gas-operated competition semi-auto, running the stainless steel Pulse Piston gas system tuned for 2 3/4" target loads behind a TRIBORE HP tapered-bore barrel. This one is built right-hand on a matte black anodized receiver with blue anodized controls and magazine cap, in flame-figured European walnut with the Micro-Metric 3D adjustable comb and Fabarm's Quick Release Rib system, supplied with two ribs giving 50/50 and 65/35 points of impact. Unfired with the factory barrel label still applied, and supplied in the factory hard case with five extended EXIS HP Competition choke tubes.
(factory specs)
Details
| Model | L4S All Sport RS |
|---|---|
| Gauge/Caliber | 12 gauge |
| Barrel Configuration | 30" TRIBORE HP tapered-bore barrel; ventilated top rib tapering 11mm to 8mm, 8.5mm rib height; Q.R.R. Quick Release Rib system, two ribs included at 50/50 and 65/35 points of impact |
| Rib | Ventilated top rib tapering 11mm to 8mm, 8.5mm rib height, with long rectangular side vents and engraved Quick Release Rib along its length; white Bradley-style front bead standing proud of the rib, with silver mid bead |
| Proof Marks | 2 3/4" chamber; overpressure tested to 1630 BAR; steel shot proof |
| Accessories | Factory hard case; five extended EXIS HP Competition choke tubes; Q.R.R. rib set of two ribs at 50/50 and 65/35 points of impact |
Measurements
| LOP | 14 3/4" |
|---|---|
| Drop at Comb | 1 3/4" |
| Drop at Monte Carlo | 1 7/8" (factory adjustable comb, as set) |
| Drop at Heel | 2 1/2" |
| Pitch | 5° |
| Cast at Heel | 3/16" |
| Cast at Toe | 5/16" |
| Reach | 4 1/8" |
| Overall Length | 51 3/4" |
| Weight | Approx. 7.81 lbs |
Chokes
Five extended EXIS HP Competition choke tubes — Skeet, Improved Cylinder, Light Modified, Modified, Full; knurled stainless bodies with a castellated wrench crown and a red HYPERBOLIC EXIS band, supplied with one tube fitted at the muzzle
Stock
Right-hand; semi-deluxe European walnut carrying strong flame figure across both flanks of the butt, in a gloss finish; cut checkering in bordered panels to both sides of the pistol grip; Micro-Metric 3D adjustable comb (Monte Carlo, factory drop 1 7/8" as set), the black comb insert riding above the wood on two adjustment posts with the adjuster plate let into the right side of the stock; stock cast 3/16" at heel and 5/16" at toe for a right-shoulder mount; Microcell 22mm black rubber recoil pad, smooth above with a textured lower panel, molded with the FABARM name over the maker's device
Forend
Slim tapered sporting forend in matching European walnut, rounded in cross-section with a cut-checkered panel to each side, the wood tapering down and terminating plainly with no beak or flare; blue anodized knurled magazine cap standing ahead of the forend tip
Action
Gas-operated semi-automatic with Fabarm's self-adjusting stainless steel Pulse Piston gas system, tuned for 2 3/4" target loads; single trigger in a black trigger guard worked with a fanned sunburst panel on both flanks; manual safety at the rear of the trigger guard; right-side ejection port with blue anodized bolt handle and blue anodized carrier release on the left flank
Receiver
Aluminum alloy in a matte black anodized finish, the lower flanks carried in a fine textured panel worked in a small repeating geometric motif; lettering and roll marks only, with no decorative engraving — L4S in blue and silver to both flanks, with the Allsport script, the FABARM name and the three-lobe Fabarm logo on the right flank only; the left flank marked Made in Italy, 12 GA, Overpressure tested 1630 BAR, Steel shot proof; manufactured in Italy
Barrel
30" TRIBORE HP tapered-bore steel barrel in a deep black finish, the bore profile matched to the EXIS HP choke system; roll-marked FABARM USA, Cambridge MD on the underside, and Made in Italy, Overpressure tested 1630 BAR on the opposite flank