Live Inventory › Scorpion EVO 3 S1 Carbine
CZ Scorpion Evo 3 S1 Carbine .22LR New

CZ Scorpion Evo 3 S1 Carbine .22LR New

New — Factory New, Unfired
Call for price
Woolley item number 23783

All photos are of the actual gun. Every firearm ships to your FFL and includes a 3-day no-fire inspection. Store policies.

About this gun

The CZ Scorpion EVO 3 S1 Carbine in .22 LR is the rimfire build of CZ's polymer-chassis carbine, made in the Czech Republic on the same platform as the 9mm gun and styled after the select-fire A1. It carries a 16" cold hammer forged barrel threaded 1/2x28 with a cylindrical compensator installed, a full-length Picatinny rail with folding CZ iron sights, an M-LOK handguard, ambidextrous controls and a side-folding, length-adjustable stock. One 10-round polymer magazine is included.

Details

ModelScorpion EVO 3 S1 Carbine
Caliber.22 LR
HandguardOne-piece molded polymer, octagonal in profile, with M-LOK slots along both sides and the underside and the M-LOK logo molded into the left face
GripBlack polymer pistol grip with vertical finger ribbing on the front strap and a flared, palm-swelled base; CZ roundel molded into both sides
MagazineOne curved polymer magazine, 10-round capacity, with witness slots down the side and a flat extended floorplate
AccessoriesOne 10-round polymer magazine

Measurements

ThreadedYes — 1/2x28 UNEF, cylindrical compensator installed
Caliber.22 LR
Barrel Length16"
Rifling6-groove, right-hand, approximately 1:16" twist
Overall LengthApprox. 26.18" with the stock folded; approx. 33.86" to 35.83" with the stock extended
Overall HeightApprox. 8.46" with the stock and sights folded and no magazine inserted
Overall WidthApprox. 2.36" with the stock unfolded; approx. 3.23" with the stock folded
WeightApprox. 5.94 lbs without magazine
Magazine Capacity10 rounds
Trigger Pull WeightApprox. 7.4 lbs
Receiver MaterialFiberglass-reinforced polymer
Stock MaterialPolymer

Barrel

16" cold hammer forged, 6-groove rifling with a right-hand twist of approximately 1:16"; black finish, slim and of even diameter, exposed and unshrouded forward of the handguard; muzzle threaded 1/2x28 UNEF with a cylindrical ported compensator installed

Receiver

Fiberglass-reinforced polymer upper and lower in matte black with a fine textured surface; full-length Picatinny rail running continuously from over the handguard to the rear of the receiver; left side molded CZ SCORPION EVO 3 S1; right side marked MADE IN CZECH REPUBLIC CZ along the top edge, the CZ roundel with 22 l.r. above the ejection port, and CZ-USA Kansas City below it; both flanks plain, carrying factory markings only with no engraving; built by Ceska Zbrojovka Uhersky Brod in the Czech Republic

Stock

Side-folding polymer buttstock hinging at the rear of the receiver, with a telescoping butt section adjustable for length of pull; fixed comb, not adjustable — the comb is the top edge of the molded stock body, with no riser, spacers or adjustment hardware

Action

Semi-automatic, direct blowback, firing from a closed bolt; two-stage trigger with a serrated polymer blade inside an oversized polymer trigger guard integral to the lower housing; ambidextrous two-position thumb safety selector, safe and fire, with a lever and index line on both flanks; side-mounted ambidextrous charging handle; ambidextrous magazine release

Sights

Folding CZ-marked iron sights on the top rail — front adjustable post with a semicircular protective groove around the blade, sitting over the rear of the handguard; rear adjustable rotating aperture with four interchangeable peephole sizes, at the rear of the receiver. The full-length rail accepts optics

More Scorpion EVO 3 S1 Carbine in stock