
Caesar Guerini Revenant Field 20ga 30" RH New
All photos are of the actual gun. Every firearm ships to your FFL and includes a 3-day no-fire inspection. Store policies.
About this gun
The Caesar Guerini Revenant is the maker's round-body field over/under, built on a radiused side-plated action and engraved to master engraver Dario Cortini's original maple leaf and branch design, and this one is a 20 gauge on 30" barrels stocked right-hand with a fixed comb. The hand-polished coin receiver is finished in Invisalloy and worked in full-coverage silver-relief maple leaves and vines over a dark stippled ground with gold-inlaid leaves scattered through it, and the two flanks carry different game scenes — a gold-inlaid long-tailed bird rising over three birds on the ground on the left, short-tailed crested birds on the right — set against Turkish Circassian walnut in a hand-rubbed oil finish with 26 lines-per-inch checkering and a checkered wood butt. Factory new and unfired, supplied in the fitted Revenant hard case with the five flush Selectachoke tubes, choke case and choke wrench.
(factory specs)
Details
| Model | Revenant Field |
|---|---|
| Gauge/Caliber | 20 gauge |
| Barrel Configuration | 30" over/under barrels of monobloc construction; deep gloss blued finish |
| Chokes | Five internal flush-fitting, nickel-plated Selectachoke chokes — CYL, IC, M, IM, F |
| Rib | 8mm to 6mm tapered solid top rib with non-ventilated center rib; silver front bead |
| Barrel | 30" monobloc barrels; standard forcing cones; average bore .626", chrome lined; internal Selectachoke choke system |
| Proof Marks | 3" (76mm) chambers; barrels marked Made in Italy |
| Accessories | Revenant hard case with fitted interior, velvet stock sleeve and barrel sleeve; five flush-fitting nickel-plated Selectachoke chokes — CYL, IC, M, IM, F; choke case; choke wrench |
Measurements
| LOP | 14 3/4" |
|---|---|
| Drop at Comb | 1 1/2" |
| Drop at Heel | 2 1/4" |
| Pitch | 5 degrees |
| Cast at Heel | .12" cast off |
| Cast at Toe | .3" cast off |
| Reach | 4 1/2" |
| Breech to Comb | 7 1/2" |
| Overall Length | 47 1/2" |
| Weight | Approx. 6.69 lbs |
Stock
Right-hand; Turkish Circassian walnut with hand-rubbed oil finish and heavy dark marbled figure running through the butt; 26 lines-per-inch checkering, bordered, with a plain wood point at the grip; rounded swept-back pistol grip with the long trigger guard strap blending into it, and no grip cap; fixed comb, the comb line running straight with no cheekpiece or Monte Carlo step; cast off for a right-hand shooter; checkered wood butt with teardrop inlays at heel and toe, no recoil pad
Forend
Ellipse rounded forend in matching Turkish Circassian walnut with bordered cut checkering and a plain wood point at the rear; winged forend iron engraved to match the receiver, with an inletted escutcheon around the push-button release at the tip
Action
Over/under round-body action with radiused side plates; full-width underbolt with four locking studs on the bottom of the monobloc; automatic ejectors; non-selective inertia single trigger with gold-finished blade, firing the bottom barrel first; manual top tang sliding safety
Receiver
Hand-polished coin finish with Caesar Guerini Invisalloy protective treatment; full-coverage maple leaf and vine engraving in silver relief over a dark stippled ground with gold-inlaid leaves worked through it, to master engraver Dario Cortini's original Revenant design; a different game scene on each flank — the left carrying one gold-inlaid long-tailed bird rising with its wings raised above three birds on the ground, the right carrying short-tailed crested birds, three on the ground with more rising behind them among the foliage and one of them gold-inlaid; the engraving carried forward onto the fences and across the top lever, top tang, trigger guard, action belly and forend iron, each picked out with gold leaves; oval REVENANT cartouche engraved on the action belly; made in Italy