Live Inventory › Blaser FBX Sporting
Blaser FBX Grand Luxe Acanthus 12ga 32" G7 Adj. RH New

Blaser FBX Grand Luxe Acanthus 12ga 32" G7 Adj. RH New

New — Factory New, Unfired
Call for price
Woolley item number 25250

All photos are of the actual gun. Every firearm ships to your FFL and includes a 3-day no-fire inspection. Store policies.

About this gun

This factory-new, unfired Blaser FBX Sporting Grand Luxe Acanthus is Blaser's competition over/under on the Fat Body monocoque receiver, dressed in Acanthus scroll relief engraving designed by Blaser Custom master engraver Ralph Salzmann. On this gun the receiver is signed "Design Salzmann" on the trigger plate. It has 32" multi-choke barrels, a Grade 7 walnut stock with a factory adjustable comb, and integrated balancer weights in the stock and forend. It ships in the factory hard case with five Briley Series 2 VX thin-wall choke tubes and the full set of balancer weights.

(factory specs)

Details

ModelBlaser FBX Sporting Grand Luxe Acanthus
Gauge/Caliber12ga
Barrel Configuration32" monobloc over/under barrels; ventilated tapered top rib and ventilated side ribs
ChokesMulti-choke; five Briley Series 2 VX thin-wall choke tubes (IC, LM, M, IM, F) supplied
RibVentilated flat top rib with a fine cross-hatched sighting surface, tapering 10mm to 8mm; ventilated side ribs between the barrels; red LPA fiber-optic front bead
Barrel32" monobloc over/under barrels in black; lengthened forcing cones; screw-in multi-choke system
Proof Marks3" (12/76) chambers
AccessoriesFactory hard case; five Briley Series 2 VX thin-wall choke tubes (IC, LM, M, IM, F); full set of forend and buttstock balancer weights

Measurements

LOPApprox. 14 1/2"
Drop at CombApprox. 1 7/16" (37mm) (factory adjustable comb, as set)
Drop at HeelApprox. 1 15/16" (49mm)
PitchApprox. 85°
CastApprox. 1/4" (cast-off)
WeightApprox. 8.63 lbs

Stock

Right-hand; Grade 7 Turkish walnut with strong figure; gloss finish; pistol grip with a pronounced flared grip end and checkering in zig-zag-edged panels on both sides; factory adjustable comb; integrated adjustable balancer weights in the buttstock and forend; rounded forend in figured walnut with wide checkering panels on both sides; black textured soft rubber recoil pad

Action

Over/under boxlock; detachable trigger unit with inline hammers; single selective trigger; Blaser IBS (Inertial Block System) against doubling; Blaser EBS (Ejection Ball System) automatic ejectors; manual top-tang sliding safety with integrated barrel selector, marked "F"

Receiver

Fat Body monocoque steel receiver with a semi-round contour; bright silver-gray finish with dark-filled engraving backgrounds; Blaser's Acanthus scroll relief engraving, designed by Blaser Custom master engraver Ralph Salzmann, with laser engraving. On this gun, dense large-leaf foliate scroll covers the left side panel in a raised oval-framed panel, with more scroll around the hinge-pin area and along the lower edge. The right side panel carries the same scroll, oval-framed panel and hinge-pin scroll. Scroll continues onto the receiver top edges and fences, the top tang, the top lever with its checkered thumbpiece, and panels on either side of the safety slide. The trigger guard bow and rear tang are scrolled, and the action underside and trigger plate have full scroll coverage with an engraved "Blaser" script logo. The fore-end iron is engraved to match with scroll and an oval-framed panel. "Blaser" script on the lower left side of the receiver; signed "Design Salzmann" on the trigger plate underside; made in Germany, imported by Blaser USA, San Antonio, TX

Blaser Components & Custom Configurations

Woolley Shooting carries a large variety of Blaser stocks, receivers and barrels. If you would like to swap components on this gun, or ask about other grades and configurations, please contact us. We can build to your preference from the components we have available.

More Blaser FBX Sporting in stock