
Beretta A400 Xtreme Plus KO Optifade Marsh 12ga 30" RH New
All photos are of the actual gun. Every firearm ships to your FFL and includes a 3-day no-fire inspection. Store policies.
About this gun
This factory-new Beretta A400 Xtreme Plus KO is a 12 gauge waterfowl semi-auto. It has a 3 1/2" chamber and a 30" Steelium Plus barrel, and the whole gun is finished in GORE Optifade Marsh camo. It has the B-Link self-cleaning gas system, the Kick-Off Mega hydraulic recoil reduction system and oversized controls for gloved hands. It ships in Beretta's fitted hard case with five extended Optima-Choke HP Black Edition tubes and the stock shim and spacer kit.
(factory specs)
Details
| Model | A400 Xtreme Plus KO Optifade Marsh |
|---|---|
| Gauge/Caliber | 12 Gauge, 3 1/2" (89mm) chamber; fires 2 3/4", 3" and 3 1/2" shells, including lead, steel and HP steel, with no adjustment between lengths |
| Barrel Configuration | 30" single barrel; Steelium Plus tri-alloy (Ni-Cr-Mo) steel, deep-drilled and cold hammer-forged; OptimaBore HP bore; 7x7mm stepped ventilated rib |
| Chokes | Five extended Optima-Choke HP Black Edition tubes: Cylinder (C), Improved Cylinder (IC), Modified (M), Improved Modified (IM) and Full (F). One tube is fitted in the barrel. Choke wrench included. |
| Rib | 7x7mm stepped ventilated rib with large oval windows, finished in camo to match the barrel, with a serrated anti-glare top; red fiber-optic front sight on a raised block at the muzzle; steel mid-bead |
| Proof Marks | 3 1/2" (89mm) chamber; barrel stamped for 2 3/4", 3" and 3 1/2" shells |
Measurements
| LOP | Approx. 14 1/4" (adjustable with the included spacers) |
|---|---|
| Drop at Comb | Approx. 1 1/2" (at the 60mm shim setting) |
| Drop at Heel | Approx. 2 3/8" (60mm shim, as shipped) |
| Cast at Heel | Approx. 0.16" (4mm) cast-off (DX shim, as shipped) |
| Overall Length | Approx. 50.5" |
| Weight | Approx. 7.8 lbs |
Stock
Right-hand; synthetic B-Steady two-section stock in GORE Optifade Marsh camo; Kick-Off Mega hydraulic recoil reduction system (Beretta claims up to 70% less felt recoil), with a "KICK OFF" badge on both flanks; fixed Soft Comb cheek piece in black; drop and cast set by internal stock shims (DX/SX); length of pull adjustable with the included spacers and 1" stock extension; black rubberized anti-slip panels on the pistol grip; black chevron insert where the grip meets the buttstock; Beretta trident on the grip cap; synthetic semi-auto forend in matching camo with large black rubberized grip panels on each side, ending at the camo magazine cap; black rubber recoil pad with the Beretta trident molded in; sling stud under the buttstock
Action
Gas-operated semi-automatic; B-Link self-cleaning gas piston system with a dual-lug rotating bolt head; tubular magazine, 3+1 with the plug removed or 2+1 with the factory plug installed (migratory-bird configuration); right-side ejection; single-stage, non-adjustable trigger with a polished bright blade; reversible two-position crossbolt safety; oversized ribbed charging handle, large ribbed bolt-release button, enlarged loading port and polished shell lifter
Receiver
Light-alloy (aluminum alloy) receiver machined from a solid block, with Aqua Tech Shield corrosion- and wear-resistant treatment and an Optifade Marsh camo finish matching the stock. Drilled and tapped on top for an optic rail, with the four holes plugged; serrated sighting plane. Marked "A400 - Xtreme - 12ga" over "PLUS" and "MADE IN ITALY - PATENTED" on the left side, and with the Beretta trident over "BERETTA" and "Xtreme PLUS" on the right. Made in Italy by Fabbrica d'Armi Pietro Beretta, Gardone Val Trompia; imported by Beretta USA Corp., Accokeek, MD.
Barrel
30" Steelium Plus, cold hammer-forged and vacuum-distended; OptimaBore HP bore (18.6mm nominal, stamped "HP TAPERED"), finished to resist water, powder residue, sand and salt; progressive triple lengthened forcing cone; Optima-Choke HP extended choke system; camo finish
Accessories
Factory fitted hard case; five extended Optima-Choke HP Black Edition tubes (C, IC, M, IM, F); choke wrench; 1" stock extension with drop/cast shims and LOP spacers; magazine-cap removal tool; extra magazine plug; bottle of Beretta gun oil