
Beretta 686 Silver Pigeon I Sporting BFast 12ga 30" Adj. RH New
All photos are of the actual gun. Every firearm ships to your FFL and includes a 3-day no-fire inspection. Store policies.
About this gun
The 686 Silver Pigeon I Sporting is Beretta's clays gun on the low-profile 680-series frame, and this 12 gauge pairs 30" blued Steelium barrels on the Optima-Bore HP platform with a satin silver receiver engraved edge to edge in foliate scroll. It carries Beretta's B-Fast tool-adjustable stock insert for comb height, cast and rotation, and is factory new and unfired: bores clean and bright, wood unmarked, no handling wear anywhere on the metal. It comes in its Beretta hard case with five flush Optima-Choke HP tubes and the choke wrench.
Details
| Model | 686 Silver Pigeon I Sporting B-Fast |
|---|---|
| Gauge/Caliber | 12 Gauge, 3" chamber |
| Barrel Configuration | 30" over/under; blued Steelium barrels; ventilated top rib with ventilated side ribs |
| Chokes | Optima-Choke HP flush-mount interchangeable choke system; five tubes included — Cylinder, Improved Cylinder, Modified, Improved Modified and Full — with choke wrench |
| Proof Marks | 3" (76mm) chambers |
| Accessories | Beretta hard case; five flush Optima-Choke HP tubes (Cylinder, Improved Cylinder, Modified, Improved Modified, Full); choke wrench |
Measurements
| Gauge | 12 Gauge |
|---|---|
| Chamber | 3" |
| Barrel Length | 30" |
| Hand | Right Hand |
| Length of Pull | Approx. 14 3/8" |
| Drop at Comb | Approx. 1 3/8" (35mm, factory B-Fast adjustable comb as shipped) |
| Drop at Heel | Approx. 2 3/16" (55mm) |
| Weight | Approx. 7 lbs |
Stock
Right-hand; European walnut, oil finished, with light figure through the butt; cut checkering on both sides of the pistol grip and on both forend panels; B-Fast tool-adjustable stock insert, adjusting comb height, cast and comb rotation, the comb riding as a separate section above the buttstock on its posts; length of pull is a fixed factory cut; checkered Schnabel forend, slim and flat-bottomed, with a metal push-rod latch let flush into the underside; black rubber Beretta Extralight recoil pad with a dimpled face and a molded three-arrow roundel
Action
Over/under break action; trigger-plate boxlock on Beretta's low-profile 680-series action with barrel-hinge trunnions and conical locking lugs; single selective trigger with a polished silver blade in an engraved silver trigger guard; automatic ejectors; tang-mounted manual safety with an integrated sliding barrel selector, knurled and carrying a red index dot
Receiver
Steel, low profile; satin silver finish; foliate scroll and flower engraving across both side panels, mirrored side to side, each panel carrying a round flower rosette set forward at the hinge-pin location and a fine beaded border along its lower edge; BERETTA in raised block capitals on the upper receiver face; the scroll carries across the action belly, which holds the Beretta three-arrow roundel in a cartouche with MADE IN ITALY on an oval boss ahead of it, and onto the outer surface of the trigger guard; polished top lever; made in Italy
Rib
Ventilated top rib running the full length of the barrels, tapered approximately 10mm at the breech to 6mm at the muzzle, its top surface cross-matted against glare; ventilated side ribs between the barrels; white front bead with a steel mid bead
Barrel
30" cold hammer-forged Steelium barrels, deep gloss blued; Optimabore HP bores; Optima-Choke HP interchangeable choke system, tubes fitted flush at the muzzle; barrel flats marked BERETTA GARDONE V.T. MADE IN ITALY, with EXCELSIOR H.S.A. STEEL on the opposite flat and SPORTING stamped on the monobloc; bores clean and bright