
Beretta 471 Silver Hawk 12ga 28" RH Preowned
All photos are of the actual gun. Every firearm ships to your FFL and includes a 3-day no-fire inspection. Store policies.
About this gun
The 471 Silver Hawk is Beretta's boxlock side-by-side, dating from 2003 and now out of production: a nickel-chromium-molybdenum steel action with half false sideplates, hand-chased scroll across both flanks and a silver nickel finish set against blued 28" barrels. This right-hand 12 gauge is pre-owned at 90% — the barrels rate 90% with some bluing wear and minor handling marks across the top, including a fine hairline mark on the upper surface of the left barrel forward of the forend; the bores are clean; the silvered action carries no pitting, rust or finish loss; and the figured walnut rates 95% with no cracks, dents or repairs. It comes in its factory case.
Details
| Model | 471 Silver Hawk |
|---|---|
| Gauge/Caliber | 12 Gauge, 3" chambers |
| Barrel Configuration | 28" side-by-side; cold-hammer-forged barrels fused to the monobloc by laser welding; blued, joined by a narrow solid low top rib |
| Chokes | Optimachoke interchangeable flush-fitting choke system, 2 3/4" tubes with an elongated choke cone; Improved Cylinder and Modified tubes fitted |
| Rib | Narrow solid low top rib, slightly concave along its length, running from the breech to the muzzles; silver front bead |
| Proof Marks | 12 gauge, 3" (76mm) chambers; barrel legend reading Beretta — Gardone V.T., Made in Italy |
| Accessories | Factory hard case |
Measurements
| LOP | 13 3/4" |
|---|---|
| Drop at Comb | 1 1/2" |
| Drop at Heel | 2" |
| Cast | 1/4" cast-off, right-hand |
| Weight | Approx. 6.5 lbs |
Stock
Right-hand; walnut with pronounced figure, dark marbled streaking and several small burl swirls running through the butt, strongest across the right-hand face; fine bordered cut checkering wrapping the grip to a pointed rear terminus and running over the underside and flanks of the forend; rounded semi-pistol grip with no grip cap; fixed one-piece comb, with no adjustment posts, hardware or joint line; separate semi-beavertail forend, rounded along the bottom, deepest at mid-length and tapering to a point at each end, with a small light diamond escutcheon set into the checkering underneath; red rubber recoil pad over a thin black spacer; wood at 95%, with no cracks, dents or repairs
Action
Side-by-side break action; boxlock with half false sideplates machined into the receiver sides; single selective inertia trigger with barrel selector; automatic ejectors, switchable to extractor-only by a selector in the forend iron; automatic safety, sliding on the top tang behind the top lever, checkered and carrying a red index dot; top lever with a checkered oval thumbpiece, lying centered over the tang
Receiver
Nickel-chromium-molybdenum steel; silver nickel finish; hand-chased foliate acanthus scroll over the full width of both side panels, matched side to side and contained within a fine beaded border that follows the panel outline before carrying forward onto the fences at the breech; large open rosette flower heads with surrounding foliage engraved on each fence; foliate scroll across the action belly around a central shaped cartouche; BERETTA engraved in small capitals in a banner along the lower edge of each panel; scroll only, with no game scene or figure engraving on either side; made in Italy
Barrel
Chrome-lined bores, clean; Optimachoke screw-in choke system; bluing at 90% with some wear, and minor handling marks across the top of the barrels, including the fine hairline mark on the upper surface of the left barrel forward of the forend