
Benelli SBE3 12ga 28" Walnut RH New
All photos are of the actual gun. Every firearm ships to your FFL and includes a 3-day no-fire inspection. Store policies.
About this gun
This factory-new Benelli Super Black Eagle 3 is the A-Grade satin walnut build in 12 gauge, chambered for 2 3/4", 3" and 3 1/2" shells and running Benelli's Inertia Driven action. The 28" Crio barrel is gloss blued under a stepped ventilated rib with a red fiber-optic front sight, and the walnut stock is built around the Progressive Comfort recoil-reduction system with a Combtech gel comb section. It comes in its factory hard case with the five Crio chokes and wrench and the factory shim kit for drop and cast.
(factory specs)
Details
| Model | Super Black Eagle 3 (SBE3), A-Grade Satin Walnut, Right-Hand |
|---|---|
| Gauge/Caliber | 12ga |
| Barrel Configuration | 28" Crio barrel with stepped ventilated rib |
| Chokes | Five Crio chokes — Cylinder, Improved Cylinder, Modified, Improved Modified, Full — three flush (C, IM, F) and two extended (IC, M), with choke wrench; one extended tube is installed at the muzzle |
| Rib | Stepped ventilated rib running the full length of the barrel with long rectangular cutouts, flat-topped and stepped down to the front sight base; red fiber-optic front sight on a raised black base at the muzzle. |
| Barrel | 28" hammer-forged barrel, cryogenically stress-relieved after forging and marked CRIOBARREL on the left side above the Urbino maker line; gloss blued finish; Crio screw-in choke system. |
| Proof Marks | Rolled on the barrel ahead of the receiver — 12 GA. 3 1/2" -89mm- FOR 2 3/4", 3" and 3 1/2" shells, with READ OWNER'S MANUAL BEFORE USING GUN beneath. |
| Accessories | Factory hard case; five Crio chokes (C, IC, M, IM, F) with choke wrench; factory shim kit for drop and cast. |
Measurements
| LOP | Approx. 14 3/8" |
|---|---|
| Drop at Comb | Approx. 1 3/8" |
| Drop at Heel | Approx. 2 1/8" |
| Overall Length | Approx. 49.6" |
| Weight | Approx. 7.00 lbs |
Stock
Right-hand; A-Grade satin walnut stock and forend with cut checkering panels on both sides of the pistol grip and on both sides of the forend, the butt showing pronounced dark figure on both flanks; fixed comb with the Combtech gel comb section inlet flush into the top of the comb, the factory shim kit adjusting drop and cast and the stock setting up at three lengths of pull — 13 7/8", 14 3/8" as shipped, and 14 3/4"; Progressive Comfort recoil-reduction system through the buttstock; slim rounded semi-automatic walnut forearm sleeving the magazine tube and terminating flush against the magazine cap with no lip, flare or beak at the tip; black recoil pad with a grooved face over a thin black spacer; oval grip cap with a raised logo at the bottom of the pistol grip.
Action
Semi-automatic, Benelli Inertia Driven System — the exposed bolt body is engraved Benelli Inertia System and runs a rotating bolt head; black polymer trigger group with a single trigger; crossbolt safety; automatic ejection; bolt handle, ejection port and bolt-release button on the right flank; bottom loading port; 3+1 capacity with 2 3/4" shells.
Receiver
Matte black anodized aluminum alloy against the glossier polished blue of the bolt shroud and barrel, carrying factory roll marks only with no decorative engraving — BENELLI U.S.A. CORP. ACCOKEEK MD. MADE IN ITALY in three lines on the left flank, SUPER BLACK EAGLE 3 along the lower right with BENELLI ITALY behind the bolt handle; made in Italy by Benelli Armi S.p.A., Urbino.