Caesar Guerini Shotgun Models & Specifications
Competition and field over/unders, built in Italy
Sporting Models
Engineered for sporting clays and skeet competition
Summit Sporting
The Summit Sporting is an efficient tool designed to do one thing, break targets, and every feature is carefully conceived to that end. The receiver is built to withstand a lifetime of competitive shooting: thick walls and large bearing surfaces compared to other over/unders make the durability obvious. Even though they aren't likely to wear out, the trunnions and locking lugs can be easily replaced. The stock includes palm swell, cast off, and toe rotation for right-hand shooters (left-hand on order). Each barrel length is engineered to balance perfectly while staying stable, and the 12-gauge models feature CG's Maxis Bore and Choke System. Small-gauge sporters are even offered with 32" barrels.
Technical Specifications — 12 Gauge
| Gauge | 12 |
| Barrel Length | 30" (76cm), 32" (81cm), 34" (86cm) |
| Avg. Weight | 7lbs. 14oz., 8lbs., 8lbs. 2oz. |
| Avg. Barrel Wt. | 30"-1.49kg (3.28lbs.) 32"-1.52kg (3.35lbs.) 34"-1.56kg (3.44lbs.) |
| Chamber | 2 3/4" |
| Overall Length | 48.25" / 50.25" / 52.25" |
| Top Rib | 10mm (.4") parallel and ventilated |
| Rib Height | 6mm |
| Center Rib | Ventilated |
| Forcing Cones | 5" DuoCon |
| Avg. Bore | .735, Chrome lined |
| Chokes | 6 MAXIS Competition |
| Sight(s) | White Bradley front, Silver center bead |
| Receiver | Nickel w/ Invisalloy™ |
| Stock Finish | Hand rubbed oil |
| Checkering | 26 lines per inch |
| Recoil Pad | Black rubber |
| Fore-end | Schnabel |
| Safety | Manual (Automatic as an option) |
| Trigger | DTS — adj. pull, take-up, over-travel, LOP |
| Drop at Comb | 1.5" |
| Drop at Heel | 2.25" |
| Length of Pull | 14.75" (adjustable) |
| Cast at Heel | .15" |
| Cast at Toe | .315" |
| Pitch | 5° |
| Breech to Comb | 7.75" |
| Reach | 4.25" (adjustable) |
| Accessories | Stock & trigger wrench, choke case, friction choke wrench |
| Case | Plastic hard case w/ fit interior, velvet stock & barrel sleeve |
* Rib height measured from lowest point of barrel. ** Weights may vary based on wood density.
Summit Impact
The Summit Impact is built to be tuned to the shooter: point of impact, overall weight, stock fit, trigger system, recoil, and balance all adjust, making it easy to dial the gun to a personal style. The geometry encourages an upright stance for a more comfortable mount and reduced felt recoil, and the 17mm tall tapered rib increases target visibility.
Technical Specifications — 12 Gauge
| Gauge | 12 |
| Barrel Length | 30", 32" |
| Avg. Weight | 8lbs. 5ozs, 8lbs. 6ozs, 8lbs. 7oz, Up to 9lbs. 4ozs with DTS Kinetic Balancer™ |
| Avg. Barrel Wt. | 30"–1.49kg / 32"–1.52kg |
| Chamber | 2.75" |
| Overall Length | 48.25" / 50.25" |
| Top Rib | 11 - 9.6mm tapered. Adjustable from 50/50 low to 80/20 high. |
| Rib Height | 17mm |
| Center Rib | Ventilated |
| Forcing Cones | 5” DuoCon |
| Avg. Bore | .735, Chrome lined |
| Chokes | 6 MAXIS Competition |
| Sight(s) | White Bradley front, Silver center bead |
| Receiver | Invisalloy™ finish |
| Stock Finish | Hand rubbed oil |
| Checkering | 26 lines per inch |
| Recoil Pad | Black rubber |
| Fore-end | Rounded |
| Safety | Manual (Automatic as an option) |
| Trigger | DTS — adj. pull, take-up, over-travel, LOP |
| Drop at Comb | 1.5" (adjustable) |
| Drop at Monte Carlo | 1.875" |
| Drop at Heel | 2.25" |
| Length of Pull | 14.75" (adjustable) |
| Cast at Heel | .15" |
| Cast at Toe | .315" |
| Pitch | 5° |
| Breech to Comb | 7.25" |
| Reach | 4.25" (adjustable) |
| Accessories | Stock & trigger wrench, choke case, friction choke wrench |
| Case | Plastic hard case w/ fit interior, velvet stock & barrel sleeve |
* Rib height measured from lowest point of barrel. ** Weights may vary based on wood density.
Summit Ascent
The Summit Ascent is built for the modern sporting clays shooter. The 10mm tall tapered top rib, paired with a Monte Carlo stock, encourages a more upright shooting position and improves target visibility, making it especially well suited to shooters who pre-mount before calling for the target. The tapered top rib is engineered for a flat-shooting 50/50 point of impact, just where a sporting clays gun belongs. The stock includes CG's DTS adjustable comb so a wide range of shooters can dial fit precisely, and the mass distribution between stock and barrels is engineered for perfect balance.
Technical Specifications — 12 Gauge
| Gauge | 12 |
| Barrel Length | 30" (76cm), 32" (81cm) |
| Avg. Weight | 8lbs. 4oz., 8 lbs. 6oz. |
| Avg. Barrel Wt. | 30"-1.49kg (3.28lbs.) 32"-1.52kg (3.35lbs.) |
| Chamber | 2 3/4" |
| Overall Length | 48.25" / 50.25" |
| Top Rib | 11mm - 8mm Tapered |
| Rib Height | 10mm Fixed |
| Center Rib | Ventilated |
| Forcing Cones | 5" DuoCon |
| Avg. Bore | .735, Chrome lined |
| Chokes | 6 MAXIS Competition |
| Sight(s) | White Bradley front, Silver center bead |
| Receiver | Invisalloy™ finish |
| Stock Finish | Hand rubbed oil |
| Checkering | 26 lines per inch |
| Recoil Pad | Black rubber |
| Fore-end | Rounded |
| Safety | Manual (Automatic as an option) |
| Trigger | DTS — adj. pull, take-up, over-travel, LOP |
| Drop at Comb | 1.5" |
| Drop at Heel | 2.5" |
| Length of Pull | 14.75" (adjustable) |
| Cast at Heel | .15" |
| Cast at Toe | .315" |
| Pitch | 5° |
| Breech to Comb | 7.25" |
| Reach | 4" (adjustable) |
| Drop at Monte Carlo | 2" |
| Accessories | Stock & trigger wrench, choke case, friction choke wrench |
| Case | Plastic hard case w/ fit interior, velvet stock & barrel sleeve |
* Rib height measured from lowest point of barrel. ** Weights may vary based on wood density.
Invictus I Sporting
In CG's ongoing pursuit to make the best target shotgun possible, they created the Invictus, and with it, the most significant advancement in over-under durability in many years: the Invictus System. The new system completely changes how the barrel and action lock together when the gun closes, making the whole assembly stronger. All locking surfaces are now modular, creating a gun many times more durable than a traditional over-and-under. CG describes it as a shotgun whose lifespan is measured not in how long you can shoot it, but how long your children and grandchildren can.
Technical Specifications — 12 Gauge
| Gauge | 12 |
| Barrel Length | 30" (76cm), 32" (81cm) |
| Avg. Weight | 8 lbs 1 oz, 8lbs 3oz. |
| Avg. Barrel Wt. | 30"-1.56kg (3.43lbs.) 32"-1.59kg (3.50lbs.) |
| Chamber | 2 3/4" |
| Overall Length | 48.25" / 50.25" |
| Top Rib | 10mm to 8mm tapered |
| Center Rib | Ventilated |
| Forcing Cones | 5" DuoCon |
| Avg. Bore | .735, Chrome lined |
| Chokes | 6 MAXIS Competition |
| Sight(s) | White Bradley front, Silver center bead |
| Rib Height | 6mm |
| Receiver | Nickel w/ Invisalloy™ |
| Stock Finish | Hand rubbed oil |
| Checkering | 26 lines per inch |
| Recoil Pad | Black rubber |
| Fore-end | Rounded |
| Safety | Manual (Automatic as an option) |
| Trigger | DPS ultra-crisp trigger system with take up, over travel and length of pull adjustments. Factory selective release triggers available in single and double release. |
| Drop at Comb | 1.5" |
| Drop at Heel | 2.25" |
| Length of Pull | 14.75" |
| Cast at Heel | .125" |
| Cast at Toe | .25" |
| Pitch | 5° |
| Breech to Comb | 7.5" |
| Reach | 4" (adjustable) |
| Accessories | Stock & trigger wrench, choke case, friction choke wrench |
| Case | Plastic hard case w/ fit interior, velvet stock & barrel sleeve |
* Rib height measured from lowest point of barrel. ** Weights may vary based on wood density.
Invictus I Ascent
The Invictus I Ascent pairs CG's Invictus locking system with the Ascent platform. The Invictus System completely changes how the barrel and action lock together when the gun closes, with all locking surfaces now modular, making the assembly many times more durable than a traditional over-and-under. The Ascent platform adds a 10mm tall fixed top rib and Monte Carlo stock that allows a more upright shooting posture while retaining the instinctive pointing of a flat-rib sporting gun. CG describes the Ascent as engineered to shoot over a million rounds, backed by their lifetime warranty.
Technical Specifications — 12 Gauge
| Gauge | 12 |
| Barrel Length | 30" (76cm), 32" (81cm) |
| Avg. Weight | 8lbs. 4oz., 8 lbs. 6oz. |
| Avg. Barrel Wt. | 30"-1.49kg (3.28lbs.) 32"-1.52kg (3.35lbs.) |
| Chamber | 2 3/4" |
| Overall Length | 48.25" / 50.25" |
| Top Rib | 11mm - 8mm Tapered |
| Center Rib | Ventilated |
| Forcing Cones | 5" DuoCon |
| Avg. Bore | .735, Chrome lined |
| Chokes | 6 MAXIS Competition |
| Sight(s) | White Bradley front, Silver center bead |
| Rib Height | 10mm Fixed |
| Receiver | Nickel w/ Invisalloy™ |
| Stock Finish | Hand rubbed oil |
| Checkering | 26 lines per inch |
| Recoil Pad | Black rubber |
| Fore-end | Rounded |
| Safety | Manual (Automatic as an option) |
| Trigger | DPS ultra-crisp trigger system with take up, over travel and length of pull adjustments. Factory selective release triggers available in single and double release. |
| Drop at Comb | 1.75" |
| Drop at Monte Carlo | 2" |
| Drop at Heel | 2.5" |
| Length of Pull | 14.75" |
| Cast at Heel | .125" |
| Cast at Toe | .25" |
| Pitch | 5° |
| Breech to Comb | 7.5" |
| Reach | 4" (adjustable) |
| Accessories | Stock & trigger wrench, choke case, friction choke wrench |
| Case | Plastic hard case w/ fit interior, velvet stock & barrel sleeve |
* Rib height measured from lowest point of barrel. ** Weights may vary based on wood density.
.png)
Invictus I Limited
The Invictus I Limited carries CG's Invictus locking system, the most significant advancement in over-under durability in many years. The Invictus System changes how the barrel and action lock together when the gun closes, making the whole assembly stronger, and all locking surfaces are now modular. The result is a gun many times more durable than a traditional over-and-under, a shotgun whose lifespan, as CG puts it, can be measured by how long your children and grandchildren can shoot it.
Technical Specifications — 12 Gauge
| Gauge | 12 |
| Barrel Length | 32" (81cm) |
| Avg. Weight | 8lbs 3oz. |
| Avg. Barrel Wt. | 32"-1.59kg (3.50lbs.) |
| Chamber | 2 3/4" |
| Overall Length | 50.25" |
| Top Rib | 10mm to 8mm tapered |
| Center Rib | Ventilated |
| Forcing Cones | 5" DuoCon |
| Avg. Bore | .735, Chrome lined |
| Chokes | 6 MAXIS Competition |
| Sight(s) | White Bradley front, Silver center bead |
| Rib Height | 6mm |
| Receiver | Invisalloy™ finish |
| Stock Finish | Hand rubbed oil |
| Checkering | 26 lines per inch |
| Recoil Pad | Black rubber |
| Fore-end | Rounded |
| Safety | Manual (Automatic as an option) |
| Trigger | DPS ultra-crisp trigger system with take up, over travel and length of pull adjustments. Factory selective release triggers available in single and double release. |
| Drop at Comb | 1.5" |
| Drop at Heel | 2.25" |
| Length of Pull | 14.75" |
| Cast at Heel | .125" |
| Cast at Toe | .25" |
| Pitch | 5° |
| Breech to Comb | 7.5" |
| Reach | 4" (adjustable) |
| Accessories | Stock & trigger wrench, choke case, friction choke wrench |
| Case | Plastic hard case w/ fit interior, velvet stock & barrel sleeve |
* Rib height measured from lowest point of barrel. ** Weights may vary based on wood density.
.jpg)
Invictus III Sporting
The Invictus III Sporting carries CG's Invictus System, the most significant advancement in over-under durability in many years. The system completely changes how the barrel and action lock together when the gun closes, making the whole assembly stronger, with all locking surfaces now modular. CG built the Invictus to be a shotgun whose lifespan is measured not in how long you can shoot it, but how long your children and grandchildren can.
Technical Specifications — 12 Gauge
| Gauge | 12 |
| Barrel Length | 30" (76cm), 32" (81cm) |
| Avg. Weight | 8 lbs 1 oz, 8lbs 3oz. |
| Avg. Barrel Wt. | 30"-1.56kg (3.43lbs.) 32"-1.59kg (3.50lbs.) |
| Chamber | 2 3/4" |
| Overall Length | 48.25" / 50.25" |
| Top Rib | 10mm to 8mm tapered |
| Center Rib | Ventilated |
| Forcing Cones | 5" DuoCon |
| Avg. Bore | .735, Chrome lined |
| Chokes | 6 MAXIS Competition |
| Sight(s) | White Bradley front, Silver center bead |
| Rib Height | 6mm |
| Receiver | Coin w/ Invisalloy™ |
| Stock Finish | Hand rubbed oil |
| Checkering | 26 lines per inch |
| Recoil Pad | Black rubber |
| Fore-end | Rounded |
| Safety | Manual (Automatic as an option) |
| Trigger | DPS ultra-crisp trigger system with take up, over travel and length of pull adjustments. Factory selective release triggers available in single and double release. |
| Drop at Comb | 1.5" |
| Drop at Heel | 2.25" |
| Length of Pull | 14.75" |
| Cast at Heel | .125" |
| Cast at Toe | .25" |
| Pitch | 5° |
| Breech to Comb | 7.5" |
| Reach | 4" (adjustable) |
| Accessories | Stock & trigger wrench, choke case, friction choke wrench |
| Case | Plastic hard case w/ fit interior, velvet stock & barrel sleeve |
* Rib height measured from lowest point of barrel. ** Weights may vary based on wood density.
Invictus V Sporting
In 2014, CG's pursuit of the most durable target shotgun possible produced the Invictus System, the most significant advancement in over-under durability in many years. The Invictus V Sporting also introduces CG's DPS trigger system, which delivers a remarkable improvement in weight, speed, and take-up for an ultra-crisp feel; CG invites direct comparison against any target shotgun on the market today. All of that technology is complemented by a graceful side-plate action with full-coverage engraving that employs no fewer than four different techniques, including many hours of hand engraving, in a contemporary Italian Ornato style with deep-relief game scenes. CG calls the V the perfect synthesis of technology and art.
Technical Specifications — 12 Gauge
| Gauge | 12 |
| Barrel Length | 30" (76cm), 32" (81cm) |
| Avg. Weight | 8 lbs 1 oz, 8lbs 3oz. |
| Avg. Barrel Wt. | 30"-1.56kg (3.43lbs.) 32"-1.59kg (3.50lbs.) |
| Chamber | 2 3/4" |
| Overall Length | 48.25" / 50.25" |
| Top Rib | 10mm to 8mm tapered |
| Center Rib | Ventilated |
| Forcing Cones | 5" DuoCon |
| Avg. Bore | .735, Chrome lined |
| Chokes | 6 MAXIS Competition |
| Sight(s) | White Bradley front, Silver center bead |
| Rib Height | 6mm (flat) |
| Receiver | Coin w/ Invisalloy™ |
| Stock Finish | Hand rubbed oil |
| Checkering | 26 lines per inch |
| Recoil Pad | Black rubber |
| Fore-end | Rounded |
| Safety | Manual (Automatic as an option) |
| Trigger | DPS ultra-crisp trigger system with take up, over travel and length of pull adjustments. Factory selective release triggers available in single and double release. |
| Drop at Comb | 1.5" |
| Drop at Heel | 2.25" |
| Length of Pull | 14.75" |
| Cast at Heel | .125" |
| Cast at Toe | .25" |
| Pitch | 5° |
| Breech to Comb | 7.5" |
| Reach | 4" (adjustable) |
| Accessories | Stock & trigger wrench, choke case, friction choke wrench |
| Case | Plastic hard case w/ fit interior, velvet stock & barrel sleeve |
* Rib height measured from lowest point of barrel. ** Weights may vary based on wood density.
.jpg)
Invictus VII Sporting
The Invictus VII Sporting carries CG's Invictus locking system, the most significant advancement in over-under durability in many years. The Invictus System completely changes how the barrel and action lock together when the gun closes, making the whole assembly stronger, with all locking surfaces now modular. The result is a shotgun many times more durable than a traditional over-and-under, engineered, as CG puts it, to be measured not in how long you can shoot it, but how long your children and grandchildren can.
Technical Specifications — 12 Gauge
| Gauge | 12 |
| Barrel Length | 30" (76cm), 32" (81cm) |
| Avg. Weight | 8 lbs 1 oz, 8lbs 3oz. |
| Avg. Barrel Wt. | 30"-1.56kg (3.43lbs.) 32"-1.59kg (3.50lbs.) |
| Chamber | 2 3/4" |
| Overall Length | 48.25" / 50.25" |
| Top Rib | 10mm to 8mm tapered |
| Center Rib | Ventilated |
| Forcing Cones | 5" DuoCon |
| Avg. Bore | .735, Chrome lined |
| Chokes | 6 MAXIS Competition |
| Sight(s) | White Bradley front, Silver center bead |
| Rib Height | 6mm |
| Receiver | Coin w/ Invisalloy™ |
| Stock Finish | Hand rubbed oil |
| Checkering | 26 lines per inch |
| Recoil Pad | Black rubber |
| Fore-end | Rounded |
| Safety | Manual (Automatic as an option) |
| Trigger | DPS ultra-crisp trigger system with take up, over travel and length of pull adjustments. Factory selective release triggers available in single and double release. |
| Drop at Comb | 1.5" |
| Drop at Heel | 2.25" |
| Length of Pull | 14.75" |
| Cast at Heel | .125" |
| Cast at Toe | .25" |
| Pitch | 5° |
| Breech to Comb | 7.5" |
| Reach | 4" (adjustable) |
| Accessories | Stock & trigger wrench, choke case, friction choke wrench |
| Case | Plastic hard case w/ fit interior, velvet stock & barrel sleeve |
* Rib height measured from lowest point of barrel. ** Weights may vary based on wood density.
Invictus IX Sporting
The Invictus IX Sporting carries CG's Invictus locking system, the most significant advancement in over-under durability in many years. The Invictus System completely changes how the barrel and action lock together when the gun closes, making the whole assembly stronger, with all locking surfaces now modular. CG describes the Invictus as a shotgun whose lifespan can be measured not in how long you can shoot it, but how long your children and grandchildren can.
Technical Specifications — 12 Gauge
| Gauge | 12 |
| Barrel Length | 32" (81cm) |
| Avg. Weight | 8lbs 3oz. |
| Avg. Barrel Wt. | 32"-1.59kg (3.50lbs.) |
| Chamber | 2 3/4" |
| Overall Length | 48.25" / 50.25" |
| Top Rib | 10mm to 8mm tapered |
| Center Rib | Ventilated |
| Forcing Cones | 5" DuoCon |
| Avg. Bore | .735, Chrome lined |
| Chokes | 6 MAXIS Competition |
| Sight(s) | White Bradley front, Silver center bead |
| Rib Height | 6mm |
| Receiver | Coin w/ Invisalloy™ |
| Stock Finish | Hand rubbed oil |
| Checkering | 26 lines per inch |
| Recoil Pad | Black rubber |
| Fore-end | Rounded |
| Safety | Manual (Automatic as an option) |
| Trigger | DPS ultra-crisp trigger system with take up, over travel and length of pull adjustments. Factory selective release triggers available in single and double release. |
| Drop at Comb | 1.5" |
| Drop at Heel | 2.25" |
| Length of Pull | 14.75" |
| Cast at Heel | .125" |
| Cast at Toe | .25" |
| Pitch | 5° |
| Breech to Comb | 7.5" |
| Reach | 4" (adjustable) |
| Accessories | Stock & trigger wrench, choke case, friction choke wrench |
| Case | Plastic hard case w/ fit interior, velvet stock & barrel sleeve |
* Rib height measured from lowest point of barrel. ** Weights may vary based on wood density.
Challenger Ascent
The Challenger Ascent is the natural progression of the popular Ascent line of target shotguns. CG upgraded the Ascent with a bold Acanthus-leaf engraving motif on a fine Inglesina scroll background. The stock dimensions are unchanged, but the wood has been upgraded to a deluxe grade of Turkish walnut. All Ascent models feature a 10mm tall fixed rib and Monte Carlo stock that lets the shooter use a more upright shooting posture while still retaining the instinctive pointing of a flat-rib sporting gun. The result is a modern sporting gun that accommodates both pre-mounted and gun-down shooting styles while remaining very comfortable to shoot.
Technical Specifications — 12 Gauge
| Gauge | 12 |
| Barrel Length | 30" (76cm), 32" (81cm) |
| Avg. Weight | 8lbs. 4oz., 8 lbs. 6oz. |
| Avg. Barrel Wt. | 30"-1.49kg (3.28lbs.) 32"-1.52kg (3.35lbs.) |
| Chamber | 2 3/4" |
| Overall Length | 48.25" / 50.25" |
| Top Rib | 11mm - 8mm Tapered |
| Center Rib | Ventilated |
| Forcing Cones | 5" DuoCon |
| Avg. Bore | .735, Chrome lined |
| Chokes | 6 MAXIS Competition |
| Sight(s) | White Bradley front, Silver center bead |
| Rib Height | 10mm Fixed |
| Receiver | Coin w/ Invisalloy™ |
| Stock Finish | Hand rubbed oil |
| Checkering | 26 lines per inch |
| Recoil Pad | Black rubber |
| Fore-end | Rounded |
| Safety | Manual (Automatic as an option) |
| Trigger | DTS — adj. pull, take-up, over-travel, LOP |
| Drop at Comb | 1.625" (adjustable) |
| Drop at Monte Carlo | 2" |
| Drop at Heel | 2.5" |
| Length of Pull | 14.75" (adjustable) |
| Cast at Heel | .15" |
| Cast at Toe | .315" |
| Pitch | 5° |
| Breech to Comb | 7.75" |
| Reach | 4.25" (adjustable) |
| Accessories | Stock & trigger wrench, choke case, friction choke wrench |
| Case | Plastic hard case w/ fit interior, velvet stock & barrel sleeve |
* Rib height measured from lowest point of barrel. ** Weights may vary based on wood density.
Maxum Sporting
The Maxum Sporting is a striking over/under. The deep-relief Gothic scroll hand-finished engraving on the receiver, side plates, and fore-end assembly makes it stand out among other sporting guns on the clays course. The hand work and design come from the studios of the world-renowned Italian engraving house Bottega Incisioni C. Giovanelli. The coin-finish frame is hand-polished. Balancing the beauty of the engraving is a deluxe grade of Turkish walnut, featuring precision-cut 26 lines-per-inch checkering and a natural oil finish hand-rubbed to a sheen that enhances the figured grain. The 12-gauge runs CG's Maxis Bore/Choke System and is available with barrels up to 34" for the serious competitor; 20, 28, and combination two-barrel and three-barrel sets are available by special order.
Technical Specifications — 12 Gauge
| Gauge | 12 |
| Barrel Length | 30" (76cm), 32" (81cm), 34" (86cm) |
| Avg. Weight | 7lbs. 14oz., 8lbs., 8lbs. 2oz. |
| Avg. Barrel Wt. | 30"-1.49kg (3.28lbs.) 32"-1.52kg (3.35lbs.) 34"-1.56kg (3.44lbs.) |
| Chamber | 2 3/4" |
| Overall Length | 48.25" / 50.25" |
| Top Rib | 10mm (.4") parallel and ventilated |
| Center Rib | Ventilated |
| Forcing Cones | 5" DuoCon |
| Avg. Bore | .735, Chrome lined |
| Chokes | 6 MAXIS Competition |
| Sight(s) | White Bradley front, Silver center bead |
| Rib Height | 6mm |
| Receiver | Coin w/ Invisalloy™ |
| Stock Finish | Hand rubbed oil |
| Checkering | 26 lines per inch |
| Recoil Pad | Black rubber |
| Fore-end | Schnabel |
| Safety | Manual (Automatic as an option) |
| Trigger | DTS — adj. pull, take-up, over-travel, LOP |
| Drop at Comb | 1.5" |
| Drop at Heel | 2.25" |
| Length of Pull | 14.75" (adjustable) |
| Cast at Heel | .15" |
| Cast at Toe | .315" |
| Pitch | 5° |
| Breech to Comb | 7.75" |
| Reach | 4.25" (adjustable) |
| Accessories | Stock & trigger wrench, choke case, friction choke wrench |
| Case | Plastic hard case w/ fit interior, velvet stock & barrel sleeve |
* Rib height measured from lowest point of barrel. ** Weights may vary based on wood density.
Magnus Sporting
CG looked at one of their most popular guns and asked what they could do to make it even better. Staying with the same general theme, they dramatically improved the engraving. They removed weight from the muzzle ends to make the gun handle better. They created a new top rib featuring an 8-to-10mm taper and gracefully sculpted the rib posts. They re-shaped the stock and increased its mass for enhanced recoil reduction. The only thing that didn't change is the price.
Technical Specifications — 12 Gauge
| Gauge | 12 |
| Barrel Length | 30" (76cm), 32" (81cm), 34" (86cm) |
| Avg. Weight | 7lbs. 14oz., 8lbs., 8lbs. 2oz. |
| Avg. Barrel Wt. | 30"-1.49kg (3.28lbs.) 32"-1.52kg (3.35lbs.) 34"-1.56kg (3.44lbs.) |
| Chamber | 2 3/4" |
| Overall Length | 48.25" / 50.25" |
| Top Rib | 10mm (.4") parallel and ventilated |
| Center Rib | Ventilated |
| Forcing Cones | 5" DuoCon |
| Avg. Bore | .735, Chrome lined |
| Chokes | 6 MAXIS Competition |
| Sight(s) | White Bradley front, Silver center bead |
| Rib Height | 6mm |
| Receiver | Nickel w/ Invisalloy™ |
| Stock Finish | Hand rubbed oil |
| Checkering | 26 lines per inch |
| Recoil Pad | Black rubber |
| Fore-end | Schnabel |
| Safety | Manual (Automatic as an option) |
| Trigger | DTS — adj. pull, take-up, over-travel, LOP |
| Drop at Comb | 1.5" |
| Drop at Heel | 2.25" |
| Length of Pull | 14.75" (adjustable) |
| Cast at Heel | .15" |
| Cast at Toe | .315" |
| Pitch | 5° |
| Breech to Comb | 7.75" |
| Reach | 4.25" (adjustable) |
| Accessories | Stock & trigger wrench, choke case, friction choke wrench |
| Case | Plastic hard case w/ fit interior, velvet stock & barrel sleeve |
* Rib height measured from lowest point of barrel. ** Weights may vary based on wood density.
Forum Sporting
The Forum Sporting combines the legendary Italian gunmakers' craft with technologically advanced manufacturing processes. Highly skilled craftsmen pour many hours of hand labor and detail into each gun. Every surface is hand-polished, even interior areas you can't see, and all components are hand-fit to ensure flawless operation. The engraving on the current Forum Sporting includes more coverage and detail, and the gun features CG's full-length trigger guard that dispenses with screws for a clean, seamless look, terminating in a perfectly fitted skeletal grip cap. The Forum Sporting is stocked in premium English walnut with a hand-rubbed oil finish, and a trim, rounded fore-end is now standard. Custom stock work is available through CG's custom shop.
Technical Specifications — 12 Gauge
| Gauge | 12 |
| Barrel Length | 30" (76cm), 32" (81cm) |
| Avg. Weight | 7lbs. 14oz., 8lbs. |
| Avg. Barrel Wt. | 30"-1.49kg (3.28lbs.) 32"-1.52kg (3.35lbs.) |
| Chamber | 2 3/4" |
| Overall Length | 48.25" / 50.25" |
| Top Rib | 10mm (.4") parallel and ventilated |
| Center Rib | Ventilated |
| Forcing Cones | 5" DuoCon |
| Avg. Bore | .735, Chrome lined |
| Chokes | 6 MAXIS Competition |
| Sight(s) | White Bradley front, Silver center bead |
| Receiver | Coin w/ Invisalloy™ |
| Stock Finish | Hand rubbed oil |
| Checkering | 26 lines per inch |
| Recoil Pad | Black rubber |
| Fore-end | Rounded |
| Safety | Manual (Automatic as an option) |
| Trigger | DTS — adj. pull, take-up, over-travel, LOP |
| Drop at Comb | 1.5" |
| Drop at Heel | 2.25" |
| Length of Pull | 14.75" (adjustable) |
| Cast at Heel | .15" |
| Cast at Toe | .315" |
| Pitch | 5° |
| Breech to Comb | 7.75" |
| Reach | 4.25" (adjustable) |
| Accessories | Stock & trigger wrench, choke case, friction choke wrench |
| Case | Plastic hard case w/ fit interior, velvet stock & barrel sleeve |
* Rib height measured from lowest point of barrel. ** Weights may vary based on wood density.
Apex Sporting
The Apex Sporting was built with the same passion for innovation that produced the Apex field gun. The high-grade English walnut stock takes a classic oil finish, and the matching fore-end has a trim, rounded profile. The stock features CG's full-length trigger guard that dispenses with screws for a clean, seamless look, terminating in a perfectly fitted skeletal grip cap. The action is embellished with full-coverage engraving that employs no fewer than four different techniques. The frame is rendered in a hand-polished coin finish under CG's Invisalloy® coating, which makes the metal rust-resistant and enhances the contrast in the engraving.
Technical Specifications — 12 Gauge
| Gauge | 12 |
| Barrel Length | 30" (76cm), 32" (81cm) |
| Avg. Weight | 7lbs. 14oz., 8lbs. |
| Avg. Barrel Wt. | 30"-1.49kg (3.28lbs.) 32"-1.52kg (3.35lbs.) |
| Chamber | 2 3/4" |
| Overall Length | 48.25" / 50.25" |
| Top Rib | 10mm (.4") parallel and ventilated |
| Center Rib | Ventilated |
| Forcing Cones | 5" DuoCon |
| Avg. Bore | .735, Chrome lined |
| Chokes | 6 MAXIS Competition |
| Sight(s) | White Bradley front, Silver center bead |
| Rib Height | 6mm |
| Receiver | Coin w/ Invisalloy™ |
| Stock Finish | Hand rubbed oil |
| Checkering | 26 lines per inch |
| Recoil Pad | Black rubber |
| Fore-end | Rounded |
| Safety | Manual (Automatic as an option) |
| Trigger | DTS — adj. pull, take-up, over-travel, LOP |
| Drop at Comb | 1.5" |
| Drop at Heel | 2.25" |
| Length of Pull | 14.75" (adjustable) |
| Cast at Heel | .15" |
| Cast at Toe | .315" |
| Pitch | 5° |
| Breech to Comb | 7.75" |
| Reach | 4.25" (adjustable) |
| Accessories | Stock & trigger wrench, choke case, friction choke wrench |
| Case | Plastic hard case w/ fit interior, velvet stock & barrel sleeve |
* Rib height measured from lowest point of barrel. ** Weights may vary based on wood density.
Woodlander
At Caesar Guerini, upland bird hunting is a passion, and the Woodlander reflects their love of fall coverts, autumn foliage, wet gundogs, and the smell of wood smoke. It was created as a classic upland game gun for tight cover and fast-flushing birds. The case-color hardened action carries an understated elegance, embellished with a single gold ruffed grouse executed in Bulino style; the nicely figured Turkish walnut wears a traditional oil finish that speaks of quality from a bygone era. The meticulously fitted wood butt plate allows for snag-free gun mounts and adds a custom look and feel. The Woodlander is also offered with an optional English straight stock. The lightweight barrels incorporate solid mid-ribs to keep out debris: a 7mm top rib in 12 gauge and a 6mm top rib in sub-gauges.
Technical Specifications — 12 Gauge
| Gauge | 12 |
| Barrel Length | 28”(71cm) |
| Avg. Weight | 6lbs. 14oz. |
| Avg. Barrel Wt. | 28”- 1.40kg(3.08lbs.) |
| Chamber | 3” |
| Overall Length | 44.25" / 46.25" |
| Top Rib | 7mm (.27”) parallel and ventilated |
| Center Rib | Non-Ventilated |
| Forcing Cones | Standard |
| Avg. Bore | .735, Chrome lined |
| Chokes | 5 Extended Competition |
| Sight(s) | White Bradley style front bead |
| Receiver | Invisalloy™ finish |
| Stock Finish | Hand rubbed oil |
| Checkering | 26 lines per inch |
| Recoil Pad | Wood butt plate |
| Fore-end | Schnabel |
| Safety | Manual (Automatic as an option) |
| Trigger | Single selective |
| Drop at Comb | 1.5" |
| Drop at Heel | 2.25" |
| Length of Pull | 14.75" |
| Cast at Heel | .12" |
| Cast at Toe | .3" |
| Pitch | 5° |
| Breech to Comb | 7.5" |
| Reach | 4.25" |
| Accessories | Choke case, friction choke wrench |
| Case | Plastic hard case w/ fit interior |
* Rib height measured from lowest point of barrel. ** Weights may vary based on wood density.
Apex Field
The Apex carries distinctly British lines, a classic Prince of Wales grip and a trim, rounded fore-end, set off by a full-length, screwless trigger guard that terminates in a fitted skeletal grip cap. The action wears full-coverage engraving using four different techniques, and the hand-polished coin finish is treated with CG's Invisalloy® coating, which makes the metal rust-resistant while enhancing engraving contrast. A trim stock with swept-back open-radius pistol grip and a matching walnut butt plate give it natural pointing and snag-free mounts.
Technical Specifications — 12 Gauge
| Gauge | 12 |
| Barrel Length | 28" (71cm) |
| Avg. Weight | 7lbs. |
| Avg. Barrel Wt. | 28"-1.40kg (3.08lbs.) |
| Chamber | 3" |
| Overall Length | 44.25" / 46.25" |
| Top Rib | 9-7mm tapered solid rib |
| Center Rib | Non-Ventilated |
| Forcing Cones | Standard |
| Avg. Bore | .735, Chrome lined |
| Chokes | 5 Extended Competition |
| Sight(s) | White Bradley style front bead |
| Receiver | Coin w/ Invisalloy™ |
| Stock Finish | Hand rubbed oil |
| Checkering | 26 lines per inch |
| Recoil Pad | Wood butt plate |
| Fore-end | Rounded |
| Safety | Manual (Automatic as an option) |
| Trigger | Single selective |
| Drop at Comb | 1.5" |
| Drop at Heel | 2.25" |
| Length of Pull | 14.75" |
| Cast at Heel | .12" |
| Cast at Toe | .3" |
| Pitch | 5° |
| Breech to Comb | 7.5" |
| Reach | 4.25" |
| Accessories | Choke case, friction choke wrench |
| Case | Plastic hard case w/ fit interior |
* Rib height measured from lowest point of barrel. ** Weights may vary based on wood density.
Forum Field
Even the most sophisticated computer-controlled machines can't match the skill of the best craftsmen and gunsmiths when it comes to creating an investment-quality field shotgun like the Forum. Each Forum field gun is the result of many hours of hand labor by artisans with a passion for precision, premium quality, and attention to the smallest details. Every surface, even those hidden from view, is hand-polished, and all components are hand-fit to ensure flawless operation. The current engraving on the Forum has been enhanced with more coverage and detail, and the gun features CG's full-length screwless trigger guard that terminates in a fitted skeletal grip cap. The stock carries a classic Prince of Wales grip matched with a trim, rounded fore-end, with extra-fine checkering, a checkered butt plate, and a hand-rubbed oil finish.
Technical Specifications — 12 Gauge
| Gauge | 12 |
| Barrel Length | 28" (71cm) |
| Avg. Weight | 7lbs. |
| Avg. Barrel Wt. | 28"-1.40kg (3.08lbs.) |
| Chamber | 3" |
| Overall Length | 44.25" / 46.25" |
| Top Rib | 9-7mm tapered solid rib |
| Center Rib | Non-Ventilated |
| Forcing Cones | Standard |
| Avg. Bore | .735, Chrome lined |
| Chokes | 5 Extended Competition |
| Sight(s) | White Bradley style front bead |
| Receiver | Coin w/ Invisalloy™ |
| Stock Finish | Hand rubbed oil |
| Checkering | 26 lines per inch |
| Recoil Pad | Checkered butt stock |
| Fore-end | Rounded |
| Safety | Manual (Automatic as an option) |
| Trigger | Single selective |
| Drop at Comb | 1.5" |
| Drop at Heel | 2.25" |
| Length of Pull | 14.75" |
| Cast at Heel | .12" |
| Cast at Toe | .3" |
| Pitch | 5° |
| Breech to Comb | 7.5" |
| Reach | 4.25" |
| Accessories | Choke case, friction choke wrench |
| Case | Plastic hard case w/ fit interior |
* Rib height measured from lowest point of barrel. ** Weights may vary based on wood density.
Magnus Field
The Magnus is designed for the discriminating hunter who appreciates a classic shotgun with timeless qualities. The elegantly sculpted sideplate receiver features upgraded engraving with ornamental scroll, depicting game scenes in gold against a richly colored case-hardened finish. The unique sideplates have no pins or screws, allowing for a perfectly smooth receiver with uninterrupted engraving. The Magnus carries a deluxe grade Turkish walnut stock with a traditional hand-rubbed oil finish to enhance the figured grain. The meticulously fitted wood butt plate allows for snag-free gun mounts and adds a custom look and feel. The grip is a Prince of Wales style with a 14.5" length of pull, and the fore-end is a schnabel design with an Anson button latch identical to the most expensive British guns.
Technical Specifications — 12 Gauge
| Gauge | 12 |
| Barrel Length | 28" (71cm), 30" (76cm) |
| Avg. Weight | 7lbs, 7 lbs |
| Avg. Barrel Wt. | 28”- 1.40kg(3.08lbs.) 30” - 1.46kg(3.22 lbs.) |
| Chamber | 3" |
| Overall Length | 44.25" / 46.25" |
| Top Rib | 7mm (.27") parallel and ventilated |
| Center Rib | Non-Ventilated |
| Forcing Cones | Standard |
| Avg. Bore | .735, Chrome lined |
| Chokes | 5 Extended Competition |
| Sight(s) | White Bradley style front bead |
| Receiver | Invisalloy™ finish |
| Stock Finish | Hand rubbed oil |
| Checkering | 26 lines per inch |
| Recoil Pad | Wood butt plate |
| Fore-end | Schnabel |
| Safety | Manual (Automatic as an option) |
| Trigger | Single selective |
| Drop at Comb | 1.5" |
| Drop at Heel | 2.25" |
| Length of Pull | 14.75" |
| Cast at Heel | .12" |
| Cast at Toe | .3" |
| Pitch | 5° |
| Breech to Comb | 7.5" |
| Reach | 4.25" |
| Accessories | Choke case, friction choke wrench |
| Case | Plastic hard case w/ fit interior |
* Rib height measured from lowest point of barrel. ** Weights may vary based on wood density.
Maxum Field
The Maxum is a true collector-grade shotgun. The deep-relief floral scroll hand-finished engraving on the receiver, side plates, and forearm assembly comes from the studios of the world-renowned Italian engraving house Bottega Incisioni C. Giovanelli. An elegant coin finish complements the strikingly detailed classic engraving, creating a functional work of art. Balancing the beauty of the engraving is a deluxe grade of Turkish walnut, featuring precision-cut 26 lines-per-inch checkering and a natural oil finish hand-rubbed to a stunning sheen. The lightweight barrels have solid center ribs to keep out debris: an 8/6mm solid tapered top rib in 12 gauge and a 7/5mm top rib in sub-gauges, completed by a high-luster deep blue finish.
Technical Specifications — 12 Gauge
| Gauge | 12 |
| Barrel Length | 28" (71cm) |
| Avg. Weight | 7lbs. |
| Avg. Barrel Wt. | 28"-1.40kg (3.08lbs.) |
| Chamber | 3" |
| Overall Length | 44.25" / 46.25" |
| Top Rib | 9-7mm tapered solid rib |
| Center Rib | Non-Ventilated |
| Forcing Cones | Standard |
| Avg. Bore | .735, Chrome lined |
| Chokes | 5 Extended Competition |
| Sight(s) | White Bradley style front bead |
| Receiver | Coin w/ Invisalloy™ |
| Stock Finish | Hand rubbed oil |
| Checkering | 26 lines per inch |
| Recoil Pad | Wood butt plate |
| Fore-end | Schnabel |
| Safety | Manual (Automatic as an option) |
| Trigger | Single selective |
| Drop at Comb | 1.5" |
| Drop at Heel | 2.25" |
| Length of Pull | 14.75" |
| Cast at Heel | .12" |
| Cast at Toe | .25" |
| Pitch | 5° |
| Breech to Comb | 7.5" |
| Reach | *4.25" |
| Accessories | Choke case, friction choke wrench |
| Case | Plastic hard case w/ fit interior |
* Rib height measured from lowest point of barrel. ** Weights may vary based on wood density.
Tempio
The Tempio is designed to be a sleek, fast-pointing shotgun in the field, a strong companion for upland game hunters. Its low-profile receiver matched with a trim stock, classic Prince of Wales grip, and Schnabel fore-end make the gun a good match for fast game birds. The Tempio features a contemporary "ornato" scroll with tasteful gold accents. The action is further enhanced by a nickel finish protected by CG's proprietary Invisalloy™ coating. Each Caesar Guerini game gun is engineered to balance near the hinge point, distributing weight evenly between the hands, the secret to a finely crafted shotgun. The Tempio also carries a deluxe grade of Turkish walnut enhanced with a hand-rubbed oil finish.
Technical Specifications — 12 Gauge
| Gauge | 12 |
| Barrel Length | 28”(71cm) |
| Avg. Weight | 6lbs. 14oz. |
| Avg. Barrel Wt. | 28”- 1.40kg(3.08lbs.) |
| Chamber | 3” |
| Overall Length | 44.25" / 46.25" |
| Top Rib | 7mm (.27”) parallel and ventilated |
| Center Rib | Non-Ventilated |
| Forcing Cones | Standard |
| Avg. Bore | .735, Chrome lined |
| Chokes | 5 Extended Competition |
| Sight(s) | White Bradley style front bead |
| Receiver | Nickel w/ Invisalloy™ |
| Stock Finish | Hand rubbed oil |
| Checkering | 26 lines per inch |
| Recoil Pad | Wood butt plate |
| Fore-end | Schnabel |
| Safety | Manual (Automatic as an option) |
| Trigger | Single selective |
| Drop at Comb | 1.5" |
| Drop at Heel | 2.25" |
| Length of Pull | 14.75" |
| Cast at Heel | .12" |
| Cast at Toe | .28" |
| Pitch | 5° |
| Breech to Comb | 7.75" |
| Reach | 4.25" |
| Accessories | Choke case, friction choke wrench |
| Case | Plastic hard case w/ fit interior |
* Rib height measured from lowest point of barrel. ** Weights may vary based on wood density.
Ellipse EVO
The Ellipse EVO represents the next generation of CG's upland game gun. With a graceful rounded action and streamlined stock, it handles, feels, and looks like the world's best handmade round-body shotguns. CG obsessed over every detail, from engraving designed to accentuate the curve of the action down to the shape of the trigger. This is not a quick makeover of existing models; the barrels, action, and stock are all different. CG describes the Ellipse simply as the evolution of the fine over-and-under hunting gun.
Technical Specifications — 12 Gauge
| Gauge | 12 |
| Barrel Length | 28" (71cm) |
| Avg. Weight | 7lbs. |
| Avg. Barrel Wt. | 28”- 1.39kg (3.10lbs.) |
| Chamber | 3" |
| Overall Length | 44.25" / 46.25" |
| Top Rib | 9-7mm tapered solid rib |
| Center Rib | Non-Ventilated |
| Forcing Cones | Standard |
| Avg. Bore | .735, Chrome lined |
| Chokes | 5 Extended Competition |
| Sight(s) | White Bradley style front bead |
| Receiver | Coin w/ Invisalloy™ |
| Stock Finish | Hand rubbed oil |
| Checkering | 26 lines per inch |
| Recoil Pad | Wood butt plate |
| Fore-end | Ellipse Rounded |
| Safety | Manual (Automatic as an option) |
| Trigger | Non-selective |
| Drop at Comb | 1.5" |
| Drop at Heel | 2.25" |
| Length of Pull | 14.75" |
| Cast at Heel | .12" |
| Cast at Toe | .3" |
| Pitch | 5° |
| Breech to Comb | 7.5" |
| Reach | 4.5" |
| Accessories | Choke case, friction choke wrench |
| Case | Plastic hard case w/ fit interior |
* Rib height measured from lowest point of barrel. ** Weights may vary based on wood density.
/CG-Ellipse-Curve-Gold-profile-right.jpg?updatedAt=1770321555953)
Ellipse Curve
CG poses the Ellipse Curve as an answer to a specific question: the world's best shotguns can cost as much as a quarter of a million dollars and take years to make, with engraving alone accounting for up to a third of the price. The result is a shotgun that combines art and function in a way few man-made objects can match, but those firearms remain an unapproachable luxury for the average hunter. What if a company could use modern technology to make a shotgun with the same qualities? That's the concept behind the Ellipse Curve.
Technical Specifications — 20 & 28 Gauge
| Gauge | 20 / 28 |
| Barrel Length | 28" (71cm) |
| Avg. Weight | 20ga 6 lbs 10 oz · 28ga 6 lbs 5 oz |
| Avg. Barrel Wt. | 28”- 1.26kg (2.77lbs.) |
| Chamber | 3" |
| Overall Length | 44.25" / 46.25" |
| Top Rib | 8-6mm tapered solid rib |
| Center Rib | Non-Ventilated |
| Forcing Cones | Standard |
| Avg. Bore | .735, Chrome lined |
| Chokes | 5 Extended Competition |
| Sight(s) | White Bradley style front bead |
| Receiver | Coin w/ Invisalloy™ |
| Stock Finish | Hand rubbed oil |
| Checkering | 26 lines per inch |
| Recoil Pad | Wood butt plate |
| Fore-end | Ellipse Rounded |
| Safety | Manual (Automatic as an option) |
| Trigger | Non-selective |
| Drop at Comb | 1.5" |
| Drop at Heel | 2.25" |
| Length of Pull | 14.75" |
| Cast at Heel | .12" |
| Cast at Toe | .3" |
| Pitch | 5° |
| Breech to Comb | 7.5" |
| Reach | *4.5" |
| Accessories | Choke case, friction choke wrench |
| Case | Plastic hard case w/ fit interior |
* Rib height measured from lowest point of barrel. ** Weights may vary based on wood density.
Revenant
Fine shotguns have always been the synthesis of art and function. Over the last 100 years some of the most iconic craftsmen have spent hundreds of hours hand-sculpting steel, perfecting mechanical excellence, and turning rare pieces of walnut into perfectly checkered stocks. Master engravers dedicate weeks of labor to turn polished metal into masterworks of art. The end result is the highest form of artistry and craftsmanship in firearm manufacturing, and yet, as CG points out, those firearms have remained an unapproachable luxury out of reach for the average hunter. The Revenant is built to bring that synthesis closer.
Technical Specifications — 20 & 28 Gauge
| Gauge | 20 / 28 |
| Barrel Length | 28", 30" |
| Avg. Weight | 20ga 6 lbs 11 oz · 28ga 6 lbs 6 oz |
| Avg. Barrel Wt. | 28”- 1.26kg (2.77lbs.) |
| Chamber | 3" |
| Overall Length | 44.25" / 46.25" |
| Top Rib | 8-6mm tapered solid rib |
| Center Rib | Non-Ventilated |
| Forcing Cones | Standard |
| Avg. Bore | .735, Chrome lined |
| Chokes | 5 Extended Competition |
| Sight(s) | White Bradley style front bead |
| Receiver | Coin w/ Invisalloy™ |
| Stock Finish | Hand rubbed oil |
| Checkering | 26 lines per inch |
| Recoil Pad | Wood butt plate |
| Fore-end | Ellipse Rounded |
| Safety | Manual (Automatic as an option) |
| Trigger | Non-selective |
| Drop at Comb | 1.5" |
| Drop at Heel | 2.25" |
| Length of Pull | 14.75" |
| Cast at Heel | .12" |
| Cast at Toe | .3" |
| Pitch | 5° |
| Breech to Comb | 7.5" |
| Reach | 4.5" |
| Accessories | Choke case, friction choke wrench |
| Case | Plastic hard case w/ fit interior |
* Rib height measured from lowest point of barrel. ** Weights may vary based on wood density.
Summit Trap
The Summit Trap is CG's no-compromise competition trap shotgun, designed for the shooter who puts a premium on performance. Its features all work in unison toward making you the best shooter you can be. The DTS (Dynamic Tuning System) lets any shooter tailor the gun to their style: the rib adjusts point of impact from 60/40% to over 100%, while the DTS comb moves four ways: height, drop, offset, and cast. The trigger is the heart of a trap gun, and the Summit's adjustable take-up, over-travel, and reach are designed to meet the most demanding expectations. Durability is engineered to handle the high-volume demands of thousands of rounds a year: oversized locking lug, rock-solid ejectors, and modular wear points.
Technical Specifications — 12 Gauge
| Gauge | 12 |
| Barrel Length | 32” (81cm), 34” (86cm) |
| Avg. Weight | 8lbs. 14oz., 9lbs |
| Avg. Barrel Wt. | 32"–1.59kg / 34"–1.65kg |
| Chamber | 2.75" |
| Overall Length | 50.25" / 52.25" |
| Top Rib | 12mm tapered rib, DTS adjustable from 60/40 to 120 |
| Rib Height | 25mm |
| Center Rib | N/A |
| Forcing Cones | 5" Long “DuoCon” |
| Avg. Bore | .735, Chrome lined |
| Chokes | 6 MAXIS Competition |
| Sight(s) | White Bradley front, Silver center bead |
| Receiver | Coin w/ Invisalloy™ |
| Stock Finish | Hand rubbed oil |
| Checkering | 26 lines per inch |
| Recoil Pad | Ventilated soft black rubber |
| Fore-end | Semi-beavertail with finger grooves |
| Safety | Manual (Automatic as an option) |
| Trigger | DTS — adj. pull, take-up, over-travel, LOP |
| Stock | Monte Carlo with DTS 4 way adjustable comb |
| Drop at Comb | 1.5" (adjustable) |
| Drop at Monte Carlo | 1.625" |
| Drop at Heel | 2.5" |
| Length of Pull | 14.75" (adjustable) |
| Cast at Heel | .15" |
| Cast at Toe | .315" |
| Pitch | 5° |
| Breech to Comb | 7.75" |
| Reach | 4" (adjustable) |
| Accessories | Stock & trigger wrench, choke case, friction choke wrench |
| Case | Plastic hard case w/ fit interior, velvet stock & barrel sleeve |
* Rib height measured from lowest point of barrel. ** Weights may vary based on wood density.
Summit Trap Compact
The Summit Trap Compact carries every feature that defines the Summit Trap: DTS rib and four-way comb adjustability, the Summit's tunable trigger, modular locking lug, rock-solid ejectors, in a fit profile suited to smaller-framed shooters. A shorter 13.9" adjustable length of pull and a smaller grip are designed to accommodate a wider variety of hand sizes. Underneath those proportions, this remains CG's no-compromise competition trap platform, engineered to handle thousands of rounds a year.
Technical Specifications — 12 Gauge (Over-and-Under)
| Gauge | 12 |
| Barrel Length | 30” (O/U) / 32” (Unsingle) |
| Avg. Weight | O/U 8 lbs 5 oz · Unsingle 8 lbs 6 oz |
| Chamber | 2.75" |
| Overall Length | 47.5" (30" O/U) / 49.5" (32" Unsingle) |
| Top Rib | 12mm tapered rib, DTS adjustable from 60/40 to 120 |
| Rib Height | 25mm |
| Center Rib | N/A |
| Forcing Cones | 5" Long “DuoCon” |
| Avg. Bore | .735, MAXIS, chrome lined |
| Chokes | O/U: 5 MAXIS (LM, M, IM, LF, F) · Unsingle: 3 MAXIS (M, IM, F) |
| Sight(s) | White Bradley front, Silver center bead |
| Receiver | Coin w/ Invisalloy™ |
| Stock | Monte Carlo with DTS 4 way adjustable comb |
| Stock Finish | Hand rubbed oil |
| Checkering | 26 lines per inch |
| Recoil Pad | Ventilated soft black rubber |
| Fore-end | Semi-beavertail with finger grooves |
| Safety | Manual (Automatic as an option) |
| Trigger | DTS — adj. pull, take-up, over-travel, LOP |
| Drop at Comb | 1.37" (adjustable) |
| Drop at Monte Carlo | 1.6" |
| Drop at Heel | 2.5" |
| Comb to Grip | 4.75" |
| Length of Pull | 13.9" (adjustable) |
| Cast at Heel | 0.25" |
| Cast at Toe | 0.5" |
| Pitch | 5° |
| Breech to Comb | 7" |
| Reach | 3.5" (adjustable) |
| Accessories | Stock & trigger wrench, choke case, friction choke wrench |
| Case | Plastic hard case w/ fit interior, velvet stock & barrel sleeve |
* Rib height measured from lowest point of barrel. ** Weights may vary based on wood density. Also offered in Unsingle configuration with 32" barrel and 8 lbs 6 oz weight.
Summit Impact Trap Combo
The Summit Impact Trap Combo carries the same broad adjustability as the Summit Impact: point of impact, overall weight, stock fit, trigger system, recoil, and balance, in a trap configuration. The geometry encourages an upright stance for a comfortable mount and reduced felt recoil. The Trap Combo offers a 17mm mid-rib alternative to CG's standard 25mm high-rib trap models, with nearly the same point-of-impact range as the high-rib guns, and the unsingle barrel adjusts from 60/40% to 110% high.
Technical Specifications — 12 Gauge
| Gauge | 12 |
| Barrel Length | 32"(81cm) |
| Avg. Weight | 8lbs. 6ozs, Up to 9lbs. 4ozs with DTS Kinetic Balancer™ |
| Avg. Barrel Wt. | 32"–1.59kg / 34"–1.65kg |
| Chamber | 2.75" |
| Overall Length | 50.25" / 52.25" |
| Top Rib | 11 - 9.6mm tapered. Adjustable from 50/50 low to 80/20 high. |
| Rib Height | 17mm |
| Center Rib | Ventilated |
| Forcing Cones | 5” DuoCon |
| Avg. Bore | .735, Chrome lined |
| Chokes | 6 MAXIS Competition |
| Sight(s) | White Bradley front, Silver center bead |
| Receiver | Invisalloy™ finish |
| Stock Finish | Hand rubbed oil |
| Checkering | 26 lines per inch |
| Recoil Pad | Black rubber |
| Fore-end | Semi-beavertail with finger grooves |
| Safety | Manual (Automatic as an option) |
| Trigger | DTS — adj. pull, take-up, over-travel, LOP |
| Drop at Comb | 1.6" |
| Drop at Monte Carlo | 1.8" |
| Drop at Heel | 2.25" |
| Length of Pull | 14.75" |
| Cast at Heel | .125" |
| Cast at Toe | .25" |
| Pitch | 5° |
| Breech to Comb | 7.5" |
| Reach | 4" (adjustable) |
| Accessories | Stock & trigger wrench, choke case, friction choke wrench |
| Case | Plastic hard case w/ fit interior, velvet stock & barrel sleeve |
* Rib height measured from lowest point of barrel. ** Weights may vary based on wood density.
Invictus III Trap
The Invictus III Trap carries CG's Invictus locking system, the most significant advancement in over-under durability in many years. The Invictus System completely changes how the barrel and action lock together when the gun closes, making the whole assembly stronger, with all locking surfaces now modular. CG describes the Invictus as a shotgun whose lifespan is measured not in how long you can shoot it, but how long your children and grandchildren can.
Technical Specifications — 12 Gauge
| Gauge | 12 |
| Barrel Length | 32” (O/U) / 34” (Unsingle) |
| Avg. Weight | Unsingle 9 lbs 5 oz · O/U 8 lbs 15 oz |
| Avg. Barrel Wt. | 32"–1.59kg (3.50 lbs) |
| Chamber | 2.75" |
| Overall Length | 50.25" / 52.25" |
| Top Rib | 12mm tapered rib, DTS adjustable from 60/40 to 120 |
| Center Rib | N/A |
| Forcing Cones | 5" Long “DuoCon” |
| Avg. Bore | .735, Chrome lined |
| Chokes | Unsingle: 3 MAXIS (M, IM, F) · O/U: 5 MAXIS (LM, M, IM, LF, F) |
| Sight(s) | White Bradley front, Silver center bead |
| Rib Height | 25mm |
| Receiver | Coin w/ Invisalloy™ |
| Stock Finish | Hand rubbed oil |
| Checkering | 26 lines per inch |
| Recoil Pad | Ventilated soft black rubber |
| Fore-end | Semi-beavertail with finger grooves |
| Safety | Manual (Automatic as an option) |
| Trigger | DPS ultra-crisp trigger system with take up, over travel and length of pull adjustments. Factory selective release triggers available in single and double release. |
| Stock | Monte Carlo with DTS 4 way adjustable comb |
| Drop at Comb | 1.5" |
| Drop at Monte Carlo | 1.6" |
| Drop at Heel | 2.5" |
| Comb to Grip | 4.75" |
| Length of Pull | 14.75" |
| Cast at Heel | .125" |
| Cast at Toe | .25" |
| Pitch | 5° |
| Breech to Comb | 7.5" |
| Reach | 4" (adjustable) |
| Accessories | Stock & trigger wrench, choke case, friction choke wrench |
| Case | Plastic hard case w/ fit interior, velvet stock & barrel sleeve |
* Rib height measured from lowest point of barrel. ** Weights may vary based on wood density.
Invictus V Trap
In 2014, CG's pursuit of the most durable target shotgun possible produced the Invictus System, the most significant advancement in over-under durability in many years. The Invictus V Trap also carries CG's DPS trigger system, which delivers a remarkable improvement in weight, speed, and take-up for an ultra-crisp feel; CG invites direct comparison against any target shotgun on the market today. The technology is complemented by a graceful side-plate action with full-coverage engraving that employs no fewer than four different techniques, including many hours of hand engraving, in a contemporary Italian Ornato style with deep-relief game scenes. CG calls the V the perfect synthesis of technology and art.
Technical Specifications — 12 Gauge
| Gauge | 12 |
| Barrel Length | 32” (O/U) / 34” (Unsingle) |
| Avg. Weight | Unsingle 9 lbs 5 oz · O/U 8 lbs 14 oz |
| Avg. Barrel Wt. | 32"–1.59kg (3.50 lbs) |
| Chamber | 2.75" |
| Overall Length | 50.25" / 52.25" |
| Top Rib | 12mm tapered rib, DTS adjustable from 60/40 to 120 |
| Center Rib | N/A |
| Forcing Cones | 5" Long “DuoCon” |
| Avg. Bore | .735, Chrome lined |
| Chokes | Unsingle: 3 MAXIS (M, IM, F) · O/U: 5 MAXIS (LM, M, IM, LF, F) |
| Sight(s) | White Bradley front, Silver center bead |
| Rib Height | 25mm |
| Receiver | Coin w/ Invisalloy™ |
| Stock Finish | Hand rubbed oil |
| Checkering | 26 lines per inch |
| Recoil Pad | Ventilated soft black rubber |
| Fore-end | Semi-beavertail with finger grooves |
| Safety | Manual (Automatic as an option) |
| Trigger | DPS ultra-crisp trigger system with take up, over travel and length of pull adjustments. Factory selective release triggers available in single and double release. |
| Stock | Monte Carlo with DTS 4 way adjustable comb |
| Drop at Comb | 1.5" |
| Drop at Monte Carlo | 1.6" |
| Drop at Heel | 2.5" |
| Comb to Grip | 4.75" |
| Length of Pull | 14.75" |
| Cast at Heel | .125" |
| Cast at Toe | .25" |
| Pitch | 5° |
| Breech to Comb | 7.5" |
| Reach | 4" (adjustable) |
| Accessories | Stock & trigger wrench, choke case, friction choke wrench |
| Case | Plastic hard case w/ fit interior, velvet stock & barrel sleeve |
* Rib height measured from lowest point of barrel. ** Weights may vary based on wood density.